How to Replace the V-Belt on a Makita Cut-Off Saw Model DPC7311
If your saw is showing signs of slippage, this article will show you how to remove and replace the V-belt on your Makita DPC7311 power cutter.
How to Diagnose a Bad Power Cord or Switch
This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool and appliance cords and switches, the two parts usually responsible for electri...
How to Replace the Blades on a Hand-Held Planer
For a planer to do its job, you need to make sure the blades are as sharp as can be. This article will walk you through the steps needed to change your Planer blades so you always get the best perform...
Power Tool Care and Maintenance 101
This article suggests guidelines for power tool care and maintenance. It also describes information tools available at eReplacementParts.com.
Time Spent Repairing:
Entry Date:2013-10-04 15:41:31
12 of 15 customers found these instructions helpful
Replaced one drive shaft bearing
Remove belt cover, unscrew pulleys (one right hand thread, one left hand) gently pry side cover off and pull out the shaft. (I left the blades in - be careful!) Remove the bearing, press new one on and reverse the process.
Discussion for the Makita 1900B Planer
Accessories for the 1900B