Product Information
Compatibility
the 55 compatible machines
This part is compatible with the following machines:
Makita
LS1013 Miter Saw
LS1013 Miter Saw
LS1212 Miter Saw
LS1212 Miter Saw
LS1011N Compound Miter Saw
LS1011N Compound Miter Saw
LS1011 Compound Miter Saw
LS1011 Compound Miter Saw
LS1211 Miter Saw
LS1211 Miter Saw
LC1230 Chop Saw
LC1230 Chop Saw
LS1220 Compound Miter Saw
LS1220 Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS1221 Compound Miter Saw
LS1221 Compound Miter Saw
LS1013F Miter Saw
LS1013F Miter Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1013 Miter Saw
LS1212 Miter Saw
LS1212 Miter Saw
LS1011N Compound Miter Saw
LS1011N Compound Miter Saw
LS1011 Compound Miter Saw
LS1011 Compound Miter Saw
LS1211 Miter Saw
LS1211 Miter Saw
LC1230 Chop Saw
LC1230 Chop Saw
LS1220 Compound Miter Saw
LS1220 Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS1221 Compound Miter Saw
LS1221 Compound Miter Saw
LS1013F Miter Saw
LS1013F Miter Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1016L 10" Dual Slide Miter Saw
LS1016L 10" Dual Slide Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1016 Dual Bevel Slide Compound Miter Saw
LS1016 Dual Bevel Slide Compound Miter Saw
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1013L (Type 1) Saw
LS1013 (Type 1) Saw
LS1013 (Type 2) Saw
LS1013 (Type 3) Saw
LS1013 (Type 4) Saw
LS1214F Saw
LS1214L (Type 1) Saw
LS1214L (Type 2) Saw
LS1214LX1 (Type 1) Saw
LS1214LX1 (Type 2) Saw
LS1214 (Type 1) Saw
LS1214 (Type 2) Saw
LS1216 (Type 2) Saw
LS1016L 10" Dual Slide Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1016 Dual Bevel Slide Compound Miter Saw
LS1016 Dual Bevel Slide Compound Miter Saw
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1016LX5 10" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1216LX4 12" Dual Slide Compound Miter Saw with Laser and Stand
LS1013L (Type 1) Saw
LS1013 (Type 1) Saw
LS1013 (Type 2) Saw
LS1013 (Type 3) Saw
LS1013 (Type 4) Saw
LS1214F Saw
LS1214L (Type 1) Saw
LS1214L (Type 2) Saw
LS1214LX1 (Type 1) Saw
LS1214LX1 (Type 2) Saw
LS1214 (Type 1) Saw
LS1214 (Type 2) Saw
LS1216 (Type 2) Saw
Products Compatibility
This item works with the following types of products:
- • Chop Saw
- • Miter Saw
- • Saw
Questions & Answers for Leaf Spring
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Miter Saw
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Wrench Set, Wire stripper & cutter, lithium grease, oil, blade cleaners
Cord breaking at both strain relief clips, too tight. Saw dirty all over, blade covered w old pitch, few small rust spots. Leaf spring clip rusted.
1. Removed saw blade. Difficult because have muscle deterioration disease & thought bolt stuck. ereplacements video reminded me bolt turns clockwise/reverse thread, very helpful! Cleaned blade.
2. Watched video on cord replacement. Removed motor housing & handle, stripped wires on new cord, replaced cord in handle & attached to switch.
3. Cleaned out dirty grease on helical gear, applied new grease, reattached motor & handle.
4 Reinstalled blade.
5. Cleaned saw all over, oiled some parts.
6. Replaced rusty leaf spring clip to hold wrench.
7. Instead of reattaching cord-retaining strain relief clips, (too tight,) attached small leather strips there to hold cord in place.
8. NOTE: various blade cleaners dissolved teflon coating on Forrest blade, left sticky mess. Next time clean more often w strong soap & water.
9. ereplacement parts VIDEOS helped me, a disabled 65 y/o woman, do repairs. Thanks Mark!
2. Watched video on cord replacement. Removed motor housing & handle, stripped wires on new cord, replaced cord in handle & attached to switch.
3. Cleaned out dirty grease on helical gear, applied new grease, reattached motor & handle.
4 Reinstalled blade.
5. Cleaned saw all over, oiled some parts.
6. Replaced rusty leaf spring clip to hold wrench.
7. Instead of reattaching cord-retaining strain relief clips, (too tight,) attached small leather strips there to hold cord in place.
8. NOTE: various blade cleaners dissolved teflon coating on Forrest blade, left sticky mess. Next time clean more often w strong soap & water.
9. ereplacement parts VIDEOS helped me, a disabled 65 y/o woman, do repairs. Thanks Mark!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information