How to Winterize Power Tools and Machines
This article explains how to properly winterize power tools and machines for winter storage, increasing the life and performance of seasonal tools.
Lawn and Garden Machines and Power Tools
This article lists the major categories of lawn and garden tools and machines, explaining the basic applications, types, and features of each.
i replaced my primer bulb on model #ut50500 and when i went to tighten the plastic husing showing the choke and run positions the throttle cable came link removed many tries to attach it to the hole in the metal plate it keeps comin out.is there an "e" ring or something else to keep it in the hole and also does it go in from the front of the hole or the rear.i've tried both ways?
On my homelite UT-50500 edger. When starting, part #C32 Clutch assembly will come loose and then you cannot crank or start. How do I make this part stay in place?
Usually you keep the crank shaft from moving by using a pin that screws in place of the spark plug to hold the piston.
Then the clutch can be torqued to spec, and you can use a little red locktite if desired. Make sure to clean the threads real good first and give it a chance to set up before using it.