Repair Forum     Repair Center    Blog
Check Order Status > Sign In Support Shopping Cart
Authentic Parts
866-802-6383      Call us toll free
8:00AM-10:00PM Mon-Fri, EST
9:00AM-8:00PM Sat, EST
Repair Parts Home    Power Tool Parts    Delta Parts    1344257 Handle Assembly
Handle Assemblyzoom view icon

Handle Assembly

Part Number: 1344257
DeltaBlack and Decker
Availability: 25+ in stock
Leaves our warehouse within 1 business day.
Price: $10.51

Quantity:
Specifications
  • OEM Delta replacement crank handle
  • Fits many drill press models
  • Complete as pictured (does not include set screw)
Description:
This is a genuine Delta crank handle which is found on many drill press models. It will directly replace a worn, broken or missing handle. Please note that this handle does not include the set screw for securing it in place. The handle will fit the Delta drill press models listed in the section below, but it is not guaranteed to fit any other tools.
Discussion
Discussion for Handle Assembly - ( 1344257 )
You need to be signed in to participate in the discussion.
You need to be signed in to particupate in the discussion.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
dwhite
Question: Drill Press Type #

dwhite

I need a handle to raise and lower the taple of my drill press. How do I tell if it is type 1, 2, or 3.

The drill press model is 17-925 a 16 in floor model
Octania
Reply: Drill Press Type #

Octania

Yes, web page manager- please clarify HOW TO DISCERN Type 1 from -2 from -3! The list shows "back ordered" with no end in sight- they may never make any more. You will probably have to repair the one you have or fabricate your own from a similar part or raw stock. Check McMaster-Carr or Grainger for similar parts that could be easily modified to suit your needs.
WJA
Reply: Drill Press Type #

WJA

I was told once by the manufacture. That when they change vendors for certain parts of their machines. They will change the type number do discern which vendor that they received the part from. As you look at the different parts diagrams you will notice that nearly all the part numbers are the same on all 3 type numbers. I did just check factory stock on the 1344257 handle assembly. And they are available. They did however and are in the process of moving their warehouse. So you can expect a longer wait time to get parts in from them until they are all settled in and have their shipping and receiving in order.

-WJA
Product Information
Manufacturer: Delta, Black and Decker
Category Number: 1344257
Classification: Part
Weight: 0.10 lbs.
Shipping: Ships Worldwide world wide shipping icon
Repair Guides
Articles:
How to Remove and Replace a Drill Press Spindle
This article will teach you to remove and replace the sindle in your drill press. You can also use these instructions fo...
August 16, 2011
How to Diagnose a Bad Power Cord or Switch
This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool...
October 19, 2011
fancyboxy