Medium
30-60 minutes
This is a genuine Poulan overhaul engine kit designed for gas trimmers. This kit contains the necessary gaskets and seals needed to rebuild you engine. If engine runs sluggish or it dies shortly after starting it, you may need to replace some of the gaskets.
Replacing these items you would need a screwdriver and pliers.
Gasket Kit 545008044
OEM part for: Poulan
Part Number: 545008044
$11.20
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Product Description ?
- 33CC
- Classification: Part
- Weight: 0.02 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 11 machines
Poulan
PP338PT Gas Trimmer View Diagrams & Manuals
PP335 (2010) Gas Trimmer View Diagrams & Manuals
PP133 Pro Gas Trimmer View Diagrams & Manuals
PP333 Trimmer View Diagrams & Manuals
PP330 Gas Trimmer View Diagrams & Manuals
PPB330 Grass Line Trimmer, Gas View Diagrams & Manuals
PPB330 (1) Grass Line Trimmer, Gas View Diagrams & Manuals
PPB330 (2) Grass Line Trimmer, Gas View Diagrams & Manuals
PPB330 (3) Grass Line Trimmer, Gas View Diagrams & Manuals
PPB335 (Type 1) Gas Trimmer View Diagrams & Manuals
PP335 Gas Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
- Grass Trimmer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Quick Service; Quick Repair
Call requested components arrived promptly and allowed for quick repair of a Poulan Pro PP330 weed wacker and I had it up and running within the hour after the repairs. Thank you very much!
Guest -
August 19, 2023
Verified Purchase
Carb gasket easy install
Part came as stated on tracking. Was easy to install and is good now.
Guest -
March 17, 2020
Verified Purchase
Quality gasket set
Bought this set to replace gaskets on a PP333. These are quality replacements.
Todd -
July 27, 2019
Verified Purchase
Gaskets fit perfectly and worked great
Received gaskets quickly they fit my Poulan Pro 33cc weedeater perfectly. I also ordered piston/cyl kit with these gaskets and now my weedeater works great
Guest -
June 24, 2019
Verified Purchase
Wrong parts
I ordered a cylinder kit also but was sent wrong cylinder inserts. Was told to send back kit. Instead of sending cylinder kit back just ordered new cylinder inserts. They arrived today and yall still sent me wrong parts again. I believe I am done with yall.
Disappointed customer
James
Guest -
July 8, 2019
Verified Purchase
eReplacementParts Team
Hello Jimmy,
Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket Kit
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replacing the carburetor
Doug - April 6, 2016
👍 14 of 14 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Nutdriver
Parts Used
Old carb held on by two nuts, removed and replaced the old gasket with a new one
then installed the new carb. Had to replace all tubing and old inline gas filter. The
gasket kit does not include new tubing or inline gas filter,these must be purchased
separately. The old tank had to have the gas line holes increased in the size to allow
the new heaver lines to fit. A drill makes short work of it.
All back together and running like a champ! The problem was running 10% ethanol
gas in the past. It eat up the plastic gas lines designated and clogged up the carb.
Do yourself a favor use NON ETHANOL gas only in your all of your two-cycle powered
equipment,chain saws,weed-eaters,blowers and similar small motors.
then installed the new carb. Had to replace all tubing and old inline gas filter. The
gasket kit does not include new tubing or inline gas filter,these must be purchased
separately. The old tank had to have the gas line holes increased in the size to allow
the new heaver lines to fit. A drill makes short work of it.
All back together and running like a champ! The problem was running 10% ethanol
gas in the past. It eat up the plastic gas lines designated and clogged up the carb.
Do yourself a favor use NON ETHANOL gas only in your all of your two-cycle powered
equipment,chain saws,weed-eaters,blowers and similar small motors.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Weed eater would stall when idling up.
DAVID - September 8, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Carburetor cleaner
1. Removed rear cover.
2. Removed fuel lines from carburetor.
3. Removed fuel tank.
4. Removed carburetor.
5. Removed carburetor cover.
6. Clean carburetor with carburetor cleaner.
7. Replaced carburetor gaskets.
8. Removed carburetor boot from motor.
9. Replaced carburetor boot.
10. Reinstalled carburetor.
11. Removed assembly pickup and fuel lines from fuel tank.
12. Replaced fuel lines and assembly pickup.
13. Reconnect fuel lines to carburetor.
14. Reinstall fuel tank.
15. Reinstall rear cover.
2. Removed fuel lines from carburetor.
3. Removed fuel tank.
4. Removed carburetor.
5. Removed carburetor cover.
6. Clean carburetor with carburetor cleaner.
7. Replaced carburetor gaskets.
8. Removed carburetor boot from motor.
9. Replaced carburetor boot.
10. Reinstalled carburetor.
11. Removed assembly pickup and fuel lines from fuel tank.
12. Replaced fuel lines and assembly pickup.
13. Reconnect fuel lines to carburetor.
14. Reinstall fuel tank.
15. Reinstall rear cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Piston had a broken ring
George - July 11, 2019
Tool Type
Trimmer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Nutdriver
I took the pp335 apart and replaced the piston and cylinder. It all went well and is running fine now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Weedeater had no compression and very very hard to start if at all
Dennis - June 24, 2019
Tool Type
Trimmer
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Nutdriver, Set of Torques screwdrivers
1. Removed parts off weedeater to expose cyl
2. Removed cylinder
3. Removed piston off rod and old seals
4. Put new seals and gasket in place
5. Put new ring on piston and put piston back on rod. Make sure you put piston on just as it was
6. Put new cylinder back on
7. Asembled all the parts back on weedeater
8. Reajusted carb and started right up and been using it since
2. Removed cylinder
3. Removed piston off rod and old seals
4. Put new seals and gasket in place
5. Put new ring on piston and put piston back on rod. Make sure you put piston on just as it was
6. Put new cylinder back on
7. Asembled all the parts back on weedeater
8. Reajusted carb and started right up and been using it since
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine locked up; it had been run without oil.
David - May 15, 2019
Tool Type
Trimmer
Difficulty
Expert
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Spanner wrench, small bench vise, adjustable groove pliers
Completely disassembled engine, including all external items such as fuel tank, carburetor, exhaust, clutch, etc.
Assembled all new parts for engine and reinstalled all external components and made all proper adjustments.
Tested and confirmed repair! Works great!!!
Assembled all new parts for engine and reinstalled all external components and made all proper adjustments.
Tested and confirmed repair! Works great!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Won't start.
Fred - April 23, 2018
👍 0 of 1 people found this instruction helpful
Tool Type
Hedge Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Fixed it with your parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
