This is a genuine OEM sourced replacement part designed for use with Black and Decker blowers. This is the main fan which connects to the motor and it is what moves the air. Please note plastic nut used to attach this fan is sold separately. This blower fan is made out of plastic and it is sold individually. To complete this repair you will need a screwdriver and a wrench.
Fan 607016-00
OEM part for: DeWALT, Black and Decker
Part Number: 607016-00
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 18 machines
Black and Decker
This item works with the following types of products:
- Blower Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Fan
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replace the fan
Tool Type
Blower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set
Parts Used
First problem, not knowing if the nut holding on the fan was regular or reverse thread. Found that it was left hand and backed it off the screw.
Second problem, how to get the old fan off the axle. Found that is was nothing but a press fit. Forced it off without breaking anything.
Inserting the new fan blade took a bit of pressure but not too bad.
Reinstalling the nut was simple. After then, nothing more to do but go back to work in the yard.
Bottom line; easy to do once you know how to do it.
Impeller fan worn out.
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Blower fan blades worn down causing reduced air flow.
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
2. Remove fan from shaft, mine removed by hand.
3. Install new fan, ensure properly aligned and fully seated on shaft.
4. Reinstall retaining nut - nut has reverse thread so turn left to tighten.
5. Attach nozzle and test fan.
Easy repair to perform and lots cheaper than buying a new blower!
Blower fan badly chewed up.
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
dull fan
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Blower fan worn out
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
The catch was broken, the fan worn after about 12 years
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, T15 Torx Screw driver Mastercraft 57-3304-6
Parts Used
Removed 11 Torx screws, replaced catch making sure all moving parts remained in correct position. Replaced 11 screws with a "T15 Torx Screw driver 6".
Easy as pie, works like a charm Thanks for quick delivery of parts to our US relatives for pickup just before our visit to Columbus WI.
The plastic clamshell housing cracked and a hole formed, allowing leaves, rocks, sticks, etc. to fly out instead of going into the vac bag.
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Required a Torx T15 long-shaft screwdriver
2. Removed the hard plastic "fan" that shreds the leaves, etc. This required removing the plastic nut that holds it on, which I did using my socket set.
3. Put the new fan on after recycling the old one, screwing on a new plastic nut with my socket wrench.
4. Fit the old vacuum tube, which was not damaged, into the new clamshell housing and reassembled the clamshell using the original screws, which were all in excellent condition.
5. Cleaned off the old clamshell housing and put it into the recycling bin.
6. All done, literally as good as new, in about 20 minutes.
The catch had broken
Tool Type
Blower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
Fan was chipped.
Tool Type
Blower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.