Edger Parts
Search By Model or Part Number
Top-Rated Edger Parts
It is sold individually.
By pressing the bulb it will purge the air from the carburetor.
Then fuel will come up from the fuel tank through the fuel line then into the carburetor.
The excess fuel will be forced back into the tank through the fuel return line.
Over time the primer will lose its elasticity or crack and need to be replaced.
The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage.
Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine. This is a double layer air filter.
It is compatible with over 150 machines listed below.
The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.
Popular Edger Models
Edger Parts by Brand
Edger Repair Articles
How to Fix a 2-Cycle Engine Carburetor | How to Test a Small Engine for Spark |
This article will walk you step-by-step through the process of repairing a 2-Cycle... | If your small engine isn't starting, you'll need to diagnose many issues including the spark plug. This video walks you... |