Fitting-dual Cable 731-04216A
Part Number: 731-04216A
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
Product Information
Description:
| It is a genuine part that is supplied by the original equipment manufacturer for use with snowthrowers. This special dual cable fitting helps to secure the control cables on the handle. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. One durable plastic fitting is included. To ensure the exact location and the correct application of this part, refer to the appropriate diagrams for your model. It is secured to the handle by a screw which is sold separately. Note, a screwdriver will be needed to perform this repair. |
Compatibility
This part is compatible with the following machines:
the 10 compatible machines
Products Compatibility
This item works with the following types of products:
- • Snowblower
Questions & Answers for Fitting-dual Cable
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 4 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Cable fitting broke into two pieces
Removed nut and bolt and replaced Dual Cable Fitting using the same nut and bolt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench, Phillips head screwdriver
Original cable fitting shattered to pieces.
1. Purchased the new cable fitting.
2. Removed the bolt and the nut holding the original fitting to the snowblower handle.
3. Placed both cables into the fitting and mounted to the handle with the original nut and the bolt.
4. Tightened the nut with a phillips head screwdriver and an adjustable wrench.
A socket lug or wrench set could have been used too. Too much time would be taken to find correct size.
2. Removed the bolt and the nut holding the original fitting to the snowblower handle.
3. Placed both cables into the fitting and mounted to the handle with the original nut and the bolt.
4. Tightened the nut with a phillips head screwdriver and an adjustable wrench.
A socket lug or wrench set could have been used too. Too much time would be taken to find correct size.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Lift/stand
Auger gearbox. Sintered gear disintegrated, shear pins failed to shear.
1. Removed the plastic swivel chute
2. Removed plastic pulley cover
3. Separated auger/thrower assembly from the engine/tractor unit
4. Removed auger gearbox assembly from shroud
5. Removed auger blades from gearbox axle shaft
6. Installed auger blades on to new auger gearbox
7. Assembled in reverse order as above
2. Removed plastic pulley cover
3. Separated auger/thrower assembly from the engine/tractor unit
4. Removed auger gearbox assembly from shroud
5. Removed auger blades from gearbox axle shaft
6. Installed auger blades on to new auger gearbox
7. Assembled in reverse order as above
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Power Drill, Socket set
Blowner v-belt broken
Drain out gas turn blowner over and Relief drive and blowner tension pulleys and install new v-belts retensioned and tested
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Faulty part.
Easy and quick replacement.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Could not engage auger.
1 Removed the broken part.
2 Put the new part in place.
3 Pulled cable back.
4 Tightened screw
Easy. Took about 5 minutes.
2 Put the new part in place.
3 Pulled cable back.
4 Tightened screw
Easy. Took about 5 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Dual cable fitting screw was over tightened and fitting cracked.
Removed screw and locknut from cracked fitting. Replaced with new cable fitting. Was an easy remove and replace
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Plastic wire keeper broke
Removed broken mounting bracket. (30 seconds) replace new bracket and tighten down. Total 3 minutes. Took longer to make sure cables were in place correctly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Snowblower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Dual cable holder broke.
Removed the rest of the broken piece and replaced with new piece.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
3 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Craftsman snowblower auger control cable fitting
Part was an exact fit. The delivery was smooth and quick
Guest -
January 7, 2023
Verified Purchase
Easy fix
Cable holder
Guest -
December 31, 2019
Verified Purchase
Easy repair
Fit perfectly
Guest -
December 4, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
