Repair Parts Home Power Tool Parts DeWALT Parts DeWALT Grinder Parts
DeWALT DW402 Type 6 Angle Grinder Parts
Electric Power Tool Parts 101
This article defines the basic parts of most power tools, explains how they work, and what to look for when they stop working.
Diagnosing Electric Power Tools 101
This article is a troubleshooting guide for problems and malfunctions common to most electric power tools.
Power Switch Repair 101
This article is a 101 repair guide for power tool switch replacements, explaining the general steps involved in replacing a switch assembly.
Tool Diagnosis: Is it the Brushes or the Switch?
This article describes the differences between power switch and carbon brush failure symptoms.
Discussion for the DeWALT DW402 Type 6 Angle Grinder
Post a Comment
Ask a question, answer a question, or post a comment!
Question: How To Replace?
How do i replace the ball bearings #9 608D on my Dewalt DW402 type 6 grinder? the old one broke but i had to really destroy it to remove it.
Reply: How To Replace?
Dale at Ereplacement has a great video on removing the armature bearing. http://www.ereplacementparts.com/article/3427/How_to_Remove_an_Armature_Bearing_with_a_Vise_.html
If you only have the inner race left on the shaft you will need a bearing splitter or sometimes you can cut it off with a small cut off wheel.Hope that helps.Good luck.
Accessories for the DW402