Repair Forum     Repair Center    Blog
Check Order Status > Sign In Support Shopping Cart
Authentic Parts
866-802-6383      Call us toll free
8:00AM-10:00PM Mon-Fri, EST
9:00AM-8:00PM Sat, EST
Repair Parts Home    Power Tool Parts    Delta Parts    Delta Miter Saw Parts    Delta 34-010 Type 1 S/N FD-6575 Miter Box Parts
Delta 34-010 Type 1 S/N FD-6575 Miter Box

 Delta 34-010 Type 1 S/N FD-6575 Miter Box Parts

Page A

 Fig # Part # Img Part Name Availability Price Qty
1955030202200
Hex Wrench Obsolete - Not Available
Discontinued
$0.00N/A
3902012018563
5/8-11 LH Jam-Nut Obsolete - Not Available
Discontinued
$0.00N/A
4489170-00
Flange Obsolete - Not Available
Discontinued
$0.00N/A
5904020101726
Lock Washer
In stock
2 available
 $1.54
6901061217381
Screw
Ships in 18 - 24 business days
 $1.37
10422170262001
Chute Obsolete - Not Available
Discontinued
$0.00N/A
11680855
Altvend-DJ
Ships in 18 - 24 business days
 $2.06
11EB703709
Screw
In stock
1 available
 $0.06
12901020100503
Machine Screw
Ships in 18 - 24 business days
 $1.37
13904010101614S
Steel Washer
In stock
4 available
 $2.99
14422171040001
Spacer
Ships in 18 - 24 business days
 $3.67
17901030408015S
Cap Screw
In stock
8 available
 $3.99
18904010101614S
Steel Washer
In stock
4 available
 $2.99
21904010122479
Washer
Ships in 18 - 24 business days
 $58.75
27928070107355
Spring Obsolete - Not Available
Discontinued
$0.00N/A
Fig #Part #ImgPart NameAvailabilityPrice
29920040205335
Bearing
In stock
5 available
 $32.64
30904150120293
Ring
In stock
1 available
 $1.37
31920040916633
Bearing
Ships in 18 - 24 business days
 $22.61
32901020520716
Screw
Ships in 18 - 24 business days
 $5.45
32901020520716
Screw
Ships in 18 - 24 business days
 $5.45
33491958-00
Lock Washer
In stock
2 available
 $0.90
36928030121753
Spring
Ships in 18 - 24 business days
 $43.82
37422170710002
Pin
Ships in 18 - 24 business days
 $6.84
38901061217383
Screw
In stock
2 available
 $1.37
41842828
Brake Lever Obsolete - Not Available
Discontinued
$0.00N/A
42842827
Brake Button Obsolete - Not Available
Discontinued
$0.00N/A
43901061217383
Screw
In stock
2 available
 $1.37
48422170720001
Plate
Ships in 18 - 24 business days
 $78.97
50901064502250S
Drive Screw
In stock
2 available
 $1.54
54901040900112
Set Screw
Ships in 18 - 24 business days
 $3.40
Fig #Part #ImgPart NameAvailabilityPrice
56438020070001
Brush Assembly Obsolete - Not Available
Discontinued
$0.00N/A
57803250
Cap
In stock
2 available
 $4.29
60901250302027
Screw
Ships in 18 - 24 business days
 $1.26
61904020101726
Lock Washer
In stock
2 available
 $1.54
62904010101610S
Steel Washer
Ships in 18 - 24 business days
 $0.37
63901020100501
Machine Screw
In stock
1 available
 $1.54
64491957-00
Lock Washer Obsolete - Not Available
Discontinued
$0.00N/A
65904010101614S
Steel Washer
In stock
4 available
 $2.99
68422170430003
Fence
Ships in 18 - 24 business days
 $261.75
69901020100513
Machine Screw Obsolete - Not Available
Discontinued
$0.00N/A
70904010101614S
Steel Washer
In stock
4 available
 $2.99
71422170910001
Table Obsolete - Not Available
Discontinued
$0.00N/A
72904080213886
Washer Obsolete - Not Available
Discontinued
$0.00N/A
73901020100558
Machine Screw
Ships in 18 - 24 business days
 $1.54
75422171120004
Level SCR
Ships in 18 - 24 business days
 $2.99
Fig #Part #ImgPart NameAvailabilityPrice
79902010201226S
Nut
In stock
3 available
 $4.39
83491958-00
Lock Washer
In stock
2 available
 $0.90
84901061217383
Screw
In stock
2 available
 $1.37
861086728
Shaft
Ships in 18 - 24 business days
 $183.66
87905010105091
Pin
Ships in 18 - 24 business days
 $1.54
88904020101703S
Lock Washer
In stock
11 available
 $6.12
89901010600602
Cap Screw
In stock
3 available
 $1.00
91422173710002
Pin Assy
Ships in 18 - 24 business days
 $31.44
93904010101622
Steel Washer
Ships in 18 - 24 business days
 $1.54
94901020100576
Machine Screw
Ships in 18 - 24 business days
 $0.06
95438010040015S
Cable Clamp 5/16
Ships in 18 - 24 business days
 $0.18
97902010205435S
Jam Nut Obsolete - Not Available
Discontinued
$0.00N/A
99422173890010
Bracket
Ships in 18 - 24 business days
 $581.99
100904010101622
Steel Washer
Ships in 18 - 24 business days
 $1.54
102902010201226S
Nut
In stock
3 available
 $4.39
Fig #Part #ImgPart NameAvailabilityPrice
103901041501185
Set Screw
Ships in 18 - 24 business days
 $1.55
104905050402106S
Cotter Pin
Ships in 18 - 24 business days
 $1.54
105422171020001
Yoke
Ships in 18 - 24 business days
 $76.13
1061086733
Slide Obsolete - Not Available
Discontinued
$0.00N/A
1081086731
Spring
In stock
1 available
 $37.57
1091086727
Retainer Obsolete - Limited Quantity
In stock
1 available
 $4.19
110422171120005
Screw Obsolete - Not Available
Discontinued
$0.00N/A
111901020100558
Machine Screw
Ships in 18 - 24 business days
 $1.54
1121086725
Pointer Obsolete - Not Available
Discontinued
$0.00N/A
1141087658
Screw
Ships in 18 - 24 business days
 $2.66
115921010100033
Ball
In stock
1 available
 $2.59
1161087235
Spring
In stock
1 available
 $2.75
1171086729
Housing
Ships in 18 - 24 business days
 $79.19
118904010101620S
Washer
In stock
6 available
 $3.99
119901010600608
Cap Screw Obsolete - Not Available
Discontinued
$0.00N/A
Fig #Part #ImgPart NameAvailabilityPrice

Enter your engine's type number in this search field to show the parts that match your engine.

Your engine's type number is the second part of the model number stamped on your Briggs & Stratton engine (see picture).

Saw Parts  Miter Saw Parts

Repair Articles

Quick Fix: How to Replace the Blade on a Miter Saw
Quick Fix: How to Replace the Blade on a Miter Saw

This article shows how to replace a miter saw blade on a saw with or without a blade lock.
How to Adjust a Miter Saw
How to Adjust a Miter Saw

Miter saws often need their bevel angles and miter angles adjusted, and this article explains generalized steps to make these adjustments on most miter saws.
Power Tool Care and Maintenance 101
Power Tool Care and Maintenance 101

This article suggests guidelines for power tool care and maintenance. It also describes information tools available at eReplacementParts.com.
Discussion
Discussion for the Delta 34-010 Type 1 S/N FD-6575 Miter Box

Post a Comment
Login or signup to comment.
Login or signup to comment.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
I have a Delta miter saw that isn't working. The motor is fine but blade isn't turning. I started by taking a while to get turning to not turn at all, unless you help it along. When you do this it has no power reguardless.
WJA
Reply: Delta 34-010 Miter Saw Repair

WJA

Hello 938589,

It sounds like your drive belt is worn. It might look like it is ok but the cogs on the inside of the belt are probably worn off. Here is a link to the part number. Delta 34-010 drive belt.

Hope this helps,
-WJA
miter board Emma
Question: Change Switch In A 34-010

miter board Emma

I have a Rockwell Model 34-010 table saw and I cannot turn it off or adjust the speed. I imagine that I need to change the switch. Can I still get parts for it? And is there a good schematic somewhere on the web?
WJA
Reply: Change Switch In A 34-010

WJA

Hello miter board Emma,

The switch for the Rockwell 34-010 has been discontinued by the manufacture, however that is a common switch used in a number a power tools. If you take the switch to a power tool service center in your area you should have no problem locating one.

Good luck,
WJA
miner-bob
Question: Motor Arcing

miner-bob

I have an old delta miter box model #34-010. When switched on the motor throws blue sparks. The brushes look good. I also took out the armature and cleaned it up with emery cloth. It still arcs. Is this saw finally dead? I'm out of ideas. Can anyone advise?
[B]Situation:[/B] I have a very old Delta 34-010 power miter box.
Yeah, when I say it is old, believe me, it is. My guess is
that it is 30 years or so. It was given to me and I use it
as a chop box. Well, the belt went on it, so I brought a
replacement belt. The problem is that there isn't enough
clearance between the drive pully and the housing to slide
the new one on.

[B]Question:[/B] Does anyone know how to, or where I can
get the instructions on how to replace this?

Thanks
cmoorejack
Reply: DELTA 34-010: Drive Belt Replace...

cmoorejack

Hey Jocque
You have to [feed] the belt on..line up the slots or groves on the belt and pulleys and push and turn the belt on[it really is a tight fit..be careful not to damage the belt]..you can also tap the belt into the slots with a rubber mallet once you have it started on somewhat..:):)
Hope this helps...
Craig
Jocque
Reply: DELTA 34-010: Drive Belt Replace...

Jocque

Cmoorejack:

Thanks for your input. Tight though is not the word for it. Are there any parts of the pulley that further disassemble? There
is a "hub" jut prior to the splined pulley shaft where it is supper tight. Also, and there any lubricants that can be used? I would think that silicone is the way to go, but I don't want t make any mistakes.
Dale
Reply: DELTA 34-010: Drive Belt Replace...

Dale

Sounds to me like you got the wrong belt. Were did you get it. They have been obsolite for years.
cmoorejack
Reply: DELTA 34-010: Drive Belt Replace...

cmoorejack

Hey again,
Not really a lubricant for that..and anything that you may use could eat away or damage the belt over time.. your belt # should be a 49-083... model #s prior to DT-600 took a #925-01-032-1060 which is no longer avail...you might try to keep putting the belt on the one side as far as it will go and then take off turn to the other side and install..this may stretch the belt enough to go on all the way...I know this is tough as i have torn belts in the past installing them..! UGH [make sure you do have the correct belt first as dale suggests]
good luck...!!:)
Craig
MFSCHU
Reply: DELTA 34-010: Drive Belt Replace...

MFSCHU

Jocque, did you ever get the belt on? I have the same problem and thought you might have some advise?

Thanks,
Matt
pawest
Reply: DELTA 34-010: Drive Belt Replace...

pawest

When you've separated the two halves of the handle you'll find about 6 screws holding the right side of mitre saw. Take these out and the right side will pull away from the drive belt. Put the new belt in position and slide the shaft into the new drive belt and slowly turning the shaft at the same time. It sounds complicated but it goes on slick without any possible damage to the belt. Put the screws back in and the left side and your back in business.
Helmsman
Reply: DELTA 34-010: Drive Belt Replace...

Helmsman

Yes, you do need to do some additional disassembly. You've got the blade off and you can see where the belt goes so all you need to do is "work-it-in" right?...Wrong. You can't get the belt over the motor shaft and the big gear on the blade shaft without removing the big gear. It just slips off but it takes some leverage. I'll bet there is a pulley remover that will work but you can also do as I did. Separate the two halves of the handle/case by removing all the screws as described in the previous posting. You will have to work at prying it apart because the bearing will be slipping out of the case as you do it. Also keep your eye on the brake button. Once I had the case apart, I slipped a big flat screwdriver under the big gear and pried it up while turning the shaft with a big allen wrench inserted in the end of the shaft. You don't have to take it all the way off. Put the belt in place and put the case back together. Then tap the big gear back down while turning the belt. You may want to clean the outside of the bearing and the inside of the case where the bearing slips in to make it go together more easily. Keep and eye on the brake button during this step.
Venustiano carranza
Review: Delta - 34-010
5 star
Venustiano carranza
This has been the best tool i have ever owned. I have had it for over 20 years
david
Reply: Delta - 34-010

david

I've got you beat, I still have a 34-010 rockwell-international, 29 years, still works great. It has trimmed a lot of homes and commercial jobs. Other than the 9" blades, it has not been touched. I never use the brake so that may be why the belt is still the same one that it came with. It has been one of the best tools I've ever owned. It must have been AMERICAN made.
fancyboxy