Easy
Less than 15 minutes
Genuine OEM Replacement part used on some Bosch Demolition Hammers. This part is made out of Metal and it is Sold Individually. Cheese Head Screws have a disc with a cylindrical outer edge and height approximately half the head diameter. Uses a standard Flathead Screwdriver.
Cheese Head Screw 2914551114
OEM part for: Bosch
Part Number: 2914551114
$4.99
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Product Description ?
- DIN 84 M6x30-8.8
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Bosch
11311EVS (0611311739) Demolition Hammer View Diagrams & Manuals
11316EVS (0611316739) Demolition Hammer View Diagrams & Manuals
11317EVS (0611317739) Demolition Hammer View Diagrams & Manuals
GSH10C (0611311703) 220v - 230v Demolition Hammer View Diagrams & Manuals
This item works with the following types of products:
- Demolition Hammer Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cheese Head Screw
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Broken clamping band and missing cheese head screw.
Marvin - September 14, 2018
Tool Type
Demolition Hammer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Bosch 11316EVS Demolition Hammer repair parts were precise fit offering a short repair time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Power cord was damaged.
Taylor - August 2, 2017
Tool Type
Demolition Hammer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Remove ON/Off switch with flat head screwdriver.
2. Remove the six screws holding the handle assembly to the main body.
3. Remove old power cord, keeping in mind its orientation and where the wires connected.
4. Install new cord protector and connect wire ends into their correct locations.
5. Reattach handle assembly with the six screws.
6. Place On/Off switch half-way in its location and snap the other end in.
7. Verify that the machine functions properly.
2. Remove the six screws holding the handle assembly to the main body.
3. Remove old power cord, keeping in mind its orientation and where the wires connected.
4. Install new cord protector and connect wire ends into their correct locations.
5. Reattach handle assembly with the six screws.
6. Place On/Off switch half-way in its location and snap the other end in.
7. Verify that the machine functions properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Brushes worn badly and screws missing from vibration
Stewart - March 2, 2016
Tool Type
Demolition Hammer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, allen set
To get at the brushes on a Bosch chipping gun, remove the screws that hold the trigger handle (two are under the switch plate just pop it off with a screwdriver) slid out the brush covers, using a dental tool pull the spring up away from the brush and pull the brush out, replace with new brush, pull off the wire connector and replace with new. slide covers back in and put handle cover back on. Pop the switch plate back on, may have to move it back and forth a little to get back in position.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
