Easy
30-60 minutes
This genuine replacement carburetor is sourced from original manufacturer and it is designed for use with gas trimmers. It mixes air and gas before the fuel mix goes to the engine.
If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem.
This assembly includes a metal body carburetor with a plastic choke lever. When replacing carburetor it is advised that you also replace carburetor gaskets to ensure proper air tight seal for optimum performance. You will need a screwdriver to perform this repair.
Carburetor Assembly 309368003
OEM part for: Homelite, Ryobi
Part Number: 309368003
$36.90
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.25 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 8 machines
Ryobi
RY13010 4 Cycle Wheeled Trimmer View Diagrams & Manuals
RY13050A 4 Cycle Wheeled Edger View Diagrams & Manuals
RY34000 4 Cycle Gas Powerhead View Diagrams & Manuals
RY34420 Gas String Trimmer View Diagrams & Manuals
RY34440 (S430) Gas String Trimmer View Diagrams & Manuals
RY64400 4 Cycle Cultivator View Diagrams & Manuals
RY13015 30cc 4-Cycle Wheeled Trimmer View Diagrams & Manuals
RY34440 30cc String Trimmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
- Edger Parts
- Cultivator Parts
This part replaces obsolete part #: 309368001
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Part if perfect
part was perfect replacement.
Guest -
July 22, 2020
Verified Purchase
Wrong part quickly took care of the problem
The website listed the wrong carburetor part number for my trimmer and the part didn't fit. I called the company and had the correct part a few days later. The trimmer works better now than when it was new.
Guest -
April 30, 2020
Verified Purchase
Works like new
Works like new. After disassembling the carburetor twice there was a piece of trash or the diaphragm had a small hole in it. Regardless of what it was I ordered a new carburetor. Everything works fine.
Guest -
September 24, 2019
Verified Purchase
Exact Duplicate
This was an exact duplicate and fit as expected, appears to have fixed the problem.
Guest -
August 12, 2019
Verified Purchase
Part returned
Wrong part sent - part returned. Thank you.
Guest -
March 2, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Carburetor Assembly
My primer bulb is cracked. Is it possible to change just the primer bulb or do I need to replace the entire carburetor on this model??
Ernie
for model number RY34420
asked on 2023-11-06
Hello Ernie, thank you for your question. We did find a bulb that is specially designed for use with Homelite and Ryobi lawn and garden equipment. It has a Outer Diameter 7/8 Inch.
The part number is 0057030. We hope this helps.
eReplacementParts Team November 06, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Defective carb,was rebuilt at one time,would not run properly at med rpm.
michael - May 3, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, hex driver set
Removed the air box, Then removed the fuel lines, make sure you remember we they were on the carburetor. Removed the throttle. Removed the old carburetor and gasket,and cleaned where the gasket was. Then installed the new gasket and carburetor and replaced the fuel lines and throttle on to the new carburetor. Installed the the air box. Then removed the old spark plug and installed the new on and gapped it at 0.025. Then pumped the primer a few times and the trimmer started on the third pull.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Carburetor issues
Derrick - May 30, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
Remove the air cleaner
Remove the fuel lines and throttle
Remove the two nuts securing the carburetor remove the old carburetor and install the new carburetor, replace the nuts, rep;lace the fuel lines and the throttle.
Install the air cleaner.
Remove the fuel lines and throttle
Remove the two nuts securing the carburetor remove the old carburetor and install the new carburetor, replace the nuts, rep;lace the fuel lines and the throttle.
Install the air cleaner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Would not run at medium speed, either idle or full throttle
Ronald - August 4, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Star bit
Parts Used
1. Remove air filter assembly
2. Remove cowling
3. Remove metal grate assembly on the nose
4 Remove throttle cable,
5. Remove gasket shield.
6 Clean mating surfaces with MEK
7. Apply a light film of gasket sealer, be careful and not get material in the carb throat.
Reinstall all the parts
2. Remove cowling
3. Remove metal grate assembly on the nose
4 Remove throttle cable,
5. Remove gasket shield.
6 Clean mating surfaces with MEK
7. Apply a light film of gasket sealer, be careful and not get material in the carb throat.
Reinstall all the parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Engine kept cutting out when put under power
Kent - May 26, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Cultivator
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Removed old gas filter by fishing it out of the fuel tank, removed air intake filter, disconnected fuel lines from carburetor and removed two capture nut, pulled off old carburetor and installed new one and reversed procedure to reconnect everything.
Cleaned old plug and reinstalled it, put in new Non-Ethanol fuel primed the engine gave it two pulls and away it went. Still has a slight miss, but has power again. Probably need to change the induction coil.
Cleaned old plug and reinstalled it, put in new Non-Ethanol fuel primed the engine gave it two pulls and away it went. Still has a slight miss, but has power again. Probably need to change the induction coil.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
