eReplacementParts.com
877-346-4815
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  CB154 Carbon Brush Set

Install
Videos!
Carbon Brush Set - CB154:Makita 360 View
Carbon Brush Set - CB154:MakitaCarbon Brush Set - CB154:MakitaCarbon Brush Set - CB154:MakitaCarbon Brush Set - CB154:Makita 360 View

Carbon Brush Set CB154

Part Number: CB154
Makita
Availability: In Stock
Price: $10.64
Order within the next 13 hours
and your part ships today!

*This part replaces obsolete part #: 194986-9, 181047-4, 643152-0, 643153-8, 957805410 and 643154-6.

Product Information
Specifications
  • Brush head: 1/2
Description:
Genuine Makita replacement part
Includes two Carbon Brushes with wire lead attached.

• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.


Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Frequently Purchased With
Compatibility

This part is compatible with the following machines:

Makita
5077B Hypoid Saw
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
5277NB Hypoid Saw
LS1221 Compound Miter Saw
LS1221 Compound Miter Saw
5007FAK Circular Saw
5007FAK Circular Saw
5007FK Circular Saw
5007FK Circular Saw
LS1013F Miter Saw
LS1013F Miter Saw
2704 Table Saw
2704 Table Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1040F Compound Miter Saw
LS1040F Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
5008FA Circular Saw
5008FA Circular Saw
5377MG Magnesium Hypoid Saw
5007MGA Magnesium Circular Saw
5007MGA Magnesium Circular Saw
TW1000 Impact Wrench
LS1000 10 inch Miter Saw
LS1000 10 inch Miter Saw
3601B Router
9607BL 6000RPM Grinder
2704X1 10" Table Saw
2704X1 10" Table Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
2703X1 15A 10" Table Saw
2703X1 15A 10" Table Saw
5008MGA 8-1/4" Magnesium LED Lighted Electric Brake Circular Saw
5008MGA 8-1/4" Magnesium LED Lighted Electric Brake Circular Saw
5007NBK Type 1 7-1/4" 15A Heavy-Gauge Aluminium Base Circular Saw
5007NBK Type 1 7-1/4" 15A Heavy-Gauge Aluminium Base Circular Saw
UC3530A 14" Electric Chain Saw
UC3530A 14" Electric Chain Saw
2401B 10" Miter Saw
2401B 10" Miter Saw
UC4030A 16" Electric Chain Saw
UC4030A 16" Electric Chain Saw
2414 Type 1 Cut-Off Saw
2414 Type 2 Cut-Off Saw
5477NB 7-1/4" Hypoid Saw
3612BR Router
2030 (Type 1) 12" Planer-Jointer
2030 (Type 1) 12" Planer-Jointer
2030 (Type 2) 12" Planer-Jointer
2030 (Type 2) 12" Planer-Jointer
2705 10 in. Contractor Table Saw
2705 10 in. Contractor Table Saw
LS1430 14" Miter Saw
LS1430 14" Miter Saw
LS1400 14" Miter Saw
LS1400 14" Miter Saw
LS1016L 10" Dual Slide Miter Saw
LS1016L 10" Dual Slide Miter Saw
5007NK 7-1/4" Circular Saw
5007NK 7-1/4" Circular Saw
5057KB 7-1/4" Circular Saw
5057KB 7-1/4" Circular Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1016LX 10" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216L 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
LS1216LX 12" Dual Slide Compound Miter Saw
5007MG Magnesium Circular Saw
Expand the 150+ compatible machines
Products Compatibility

This item works with the following types of products:

  • • Chain Saw
  • • Circular Saw
  • • Grinder
  • • Impact Wrench
  • • Jointer
  • • Miter Saw
  • • Planer
  • • Router
  • • Sander
  • • Saw
  • • Table Saw
Expand List
Repair Guides
Watch the Repair Video for Carbon Brush Set

Questions & Answers for Carbon Brush Set


Angle grinder got bound up on something and was stopped and starting to smoke, at 10 seconds was able to unplug. Used again and faded down to nothing, burning smell. Will new brushes fix this grinder again, or armature?
Ronnie for model number 9557NB asked on 2022-12-01
Hello Ronnie, Thank you for the question. If the brushes are damaged or worn down, they will need to be replaced. We suggest removing them and checking before replacing the Armature. We hope this helps, good luck with this repair!
eReplacementParts Team December 01, 2022
Can I use this carbon brushes on this sander b05030k
Victor for model number B05030k asked on 2022-04-26
Hi Victor, Thank you for your question. These would not be the correct carbon brushes for your sander. The part number listed under your model number for the carbon brush set is CB407. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 26, 2022
Impact wrench smokes around the area of the brushes but the brushes appear to look good?
Bud for model number Makita tw0350 asked on 2022-04-11
Hello Bud, Thank you for your inquiry. We have researched the model number you have provided and if the brushes appear to be ok, we would recommend checking the armature and the switch. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 11, 2022
Repair Instructions: Submitted by Customers Like You
13 of 13 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Circular just would not start.
I bought a used Makita circular saw(barely used) but it wouldn't start. So I took out the brush caps. The brushes were stuck due to corrosion..pry/pulled them out and install new ones....works like new....thanks for the parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Circular Saw
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Saw motor was sparking and then stopped working altogether
1. Used a slotted screwdriver to remove the 2 carbon brushes
2. Slid the replacement brushes into place and screwed the caps back on
3. Plugged in the saw and it worked like a charm!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
7 of 8 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Small forceps to remove the brushes
Routine replacement of brushes
The old brushes had about 1/3 of their original length. I removed brush caps with a screwdriver, then used some forceps to remove the worn brushes. Installed the new brushes into the brush holder, then replaced the brush caps. I have used the planer for over 40 years without any problems other than feed roller replacement.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Router
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Metric tap and die set
Didn't work
This is on a Makita 3612BR router that was given to me. Checked the brushes, one was wore and the other was gone. Just had to remove the brush caps and clean out the brush holders, then insert the new brushes and screw the brush caps back on. There were some other things wrong like the cord was shot, easy enough to replace. Some one replaced some of the screws with SAE screws instead of METRIC, that was a small fix, tap and die set to the rescue. A good cleaning and it works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Lever 90 - 272237-1
Switch - 651567-7
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Key punch, small hammer
Table saw would not turn on.
1. Remove switch cover.
2. Take a close-up picture of electrical connections with cell phone, unplug old switch.
3. Connect new switch. (use picture for reference to be sure connections were correct.)
4. Replace switch cover. done.
5. Use key punch to carefully remove old broken plastic handle.
6. Install new handle, use 'small' hammer to tap in key.
7. Had to find a screw for tightener as mine was gone and was not included with new handle. done.
8. Removed old carbon brushes, they still had half of their original length, so I used an air hose to blow off any sawdust and put them back in. done. Did not install the new ones, not needed, will save for future use.
Saw works just fine now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chop Saw
Parts Used:
Switch Button - 411478-6
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw wouldn't start
1. Pulled out the Switch Button and put in the new.
2. Unscrewed the plastic buttons that holds the Carbon Brushes (2 each) and installed the new brushes.
3. Tried running it...came on immediately.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Lever 50 - 272255-9
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken lever and worn brushes
Removed old lever and put new one on.
Removed worn brushes and put new ones in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Would not operate
Checked brushes and they were worn down. I was please to be able to find brushes for my 35 year old Makita 10 inch miter saw. Installed new brushes and it works like new again.
Thanks
Mike M
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Dremel
Brushes gone
The old brushes were seize into the armature. I did not want to take the armature out of the saw housing. Took a dremel tool and sawed out small holes in the side of the saw where the saw vents are located. Took a small jeweler screwdriver and tap the brushes thru the holes created.. This loosed the old brushes. I made sure everything was cleaned of all carbon. Installed new carbon brushes. Saw now screams like a new one. If your saw is under warranty, I would not do this. My saw was old and I had nothing to lose.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Parts Used:
Carbon Brush Set - CB154
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Needed brushes
Removed the brushes from both sides of the motor housing with a screwdriver
Removed the old brushes
Then installed the new brushes
Then screwed the brush caps back in the motor housing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.7
Average Rating (out of 5):
50 Reviews
Click to filter by ratings:
5 stars
42
4 stars
5
3 stars
1
2 stars
1
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Brush replacement . HalCon Built
    Parts fit and worked perfectly.
    Nathan - September 11, 2023 Verified Purchase
    Nice stock of parts for my old saw
    Very friendly and helpful customer service, and my part arrived promptly!
    Guest - July 10, 2023 Verified Purchase
    Excellent
    Salesman was knowledgeable, helpful. Parts received were delivered quickly and were correct.
    Guest - May 17, 2023 Verified Purchase
    Makita Planer Bearings
    Perfect replacement. Arrived right on time. Great company to do business with!
    Leland - April 24, 2023 Verified Purchase
    Makita planer repair
    Easy online shopping for correct parts/received parts promptly/ easy repair
    royal - April 14, 2023 Verified Purchase
    Great parts
    All parts arrived fast. It was an easy fix and my 40 year old Makita miter saw works as good as ever!
    Guest - April 6, 2023 Verified Purchase
    Fit perfectly.
    Saw runs great now.
    Charles - April 4, 2023 Verified Purchase
    did the job
    My miter box was thirty years old and I thought it was done. New brushes from your company fixed it like new, and I expect it to last another thirty years.
    Guest - March 25, 2023 Verified Purchase
    search and you shall find
    I have always been very satisfied with ordering parts thru E Replacement.
    Jerri - March 16, 2023 Verified Purchase
    Easy repair
    Replaced brushes on my old makita 2708. Thought the motor might be shot. Put in new brushes and my saw is back in action.
    Guest - February 7, 2023 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    Repair Guides
    Watch the Repair Video for Carbon Brush Set
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal