Easy
15-30 minutes
This is a genuine manufacturer approved replacement burner assembly that is specially designed for Weber grills. This is the part that the flames rise from. This burner assembly is made from durable stainless steel and it includes one burner tube, an ignitor with lead wires and the hardware to secure this assembly. Please note you will need a screwdriver to complete this repair.
Burner Assembly 10401
OEM part for: Weber
Part Number: 10401
$71.25
In Stock
Ships within 1 business day 
Compatibility
This Burner Assembly will fit the following 6 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Weber
Show More Compatible ModelsThis item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Burner Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Everything came out as expected.
Moises - December 13, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, Wrench Set, Adjustable Wrench
Parts Used
Had to spend around one 1/2 hour to take off the old stews because of the rust but after, it was easy to assemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner would not ignite gas
Jerry - October 29, 2017
Tool Type
Outdoor Grill
Difficulty
Hard
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Adjustable Wrench
Parts Used
1. Took off grill table and removed old parts of burner assembly.
2. Inserted new burner assembly.
3. Since supplied wires were too short had to splice part of old wires to new wires.
4. Connected assembly and tested.
5. Reattached grill table.
2. Inserted new burner assembly.
3. Since supplied wires were too short had to splice part of old wires to new wires.
4. Connected assembly and tested.
5. Reattached grill table.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner assembly.
Dominic - August 23, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Removed the old worn assembly and replaced it with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rusted parts
Scott - August 1, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Simply followed the easy instructions included
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner assembly had corroded and disintegrated
Don - March 20, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Removed old assembly and replace with new burner unit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Igniter quit working and burner was burned away after 15 years of use
robert - February 1, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Adjustable Wrench
Parts Used
It was very easy with the instructions that came with the burner assembly. A retainer ring using pliers was removed to remove the burner assembly and after inserting the new one putting the retainer ring back on it was good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The burner was rusted so the gas did not flow freely to the charcoal, hence slow fuel ignition.
John - December 30, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Hack saw
Parts Used
The hard part was removing the old burner assembly. The nuts were completely rusted and, for me, impossible to remove in the normal way. I ended up sawing the bolts in half with a hack saw. Installing the new part was extremely easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Low flame
Jim - November 16, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
I removed the old burner assembly. Then followed the instructions on how to install the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner tube
Ronald - October 29, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
I followed the installation instructions, that the manufacture provided with the burner. Easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Burner assembly was burned out
Ruth - May 31, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
The grates were simple to install the small one on the bottom and the large one on the top. Then to install the Burner assembly. I followed the instructions that were included with the new burner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
