Repair Parts Home    Power Tool Parts    Porter Cable Parts    1313113 Brush (Sold Individually)

1313113 Brush (Sold Individually)

Part Number: 1313113
Porter CableDelta
Availability: 25+ in stock
Price: $7.23
Quantity:
Ships within 1 business day
Description:
Genuine OEM replacement part
This brush is sold individually, 2 are needed for the tools shown below
It is always best to replace both brushes, even if only one is worn.

Worn brushes frequently are the cause behind a motor running poorly.
Replacing brushes can fix a motor that’s operating intermittently.
New brushes can restore a motor’s electric braking.

Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Repair Stories
0 of 0 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Brush (Sold Individually) - 1313113
Drive Belt - 34-674
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Motor spun, but blade didnt.
I removed the black pulley cover from the end of the motor and replaced the drive belt, then replaced the pulley cover. On the opposite side of the motor I removed the brush caps with a screwdriver, then removed the worn brushes and installed the new ones and replaced the brush caps. The motor runs like new now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 0 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Brush (Sold Individually) - 1313113
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Saw was slow starting then it got to the point wouldn't start at all
There are 2 plastic screws on the side of the motor that takes a flat screwdriver take them out and pull the brushes out and reverse that procedure and plug the saw back in and turn it on. Thank You eReplacementParts.com I'm back up and running.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 0 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Brush (Sold Individually) - 1313113
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Worn brushes
Remove the brush caps, then removed the worn brushes. Then I installed the new brushes, then with the screwdriver replaced the brush caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 0 people found this instruction helpful
Tool Type:
Planer
Parts Used:
Brush (Sold Individually) - 1313113
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Brushes worn
With a screwdriver I removed the brush caps, then pulled out the worn brushes. Then just install the new brushes and use the screwdriver to replace the brush caps. Runs like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 0 people found this instruction helpful
Tool Type:
Table Saw
Parts Used:
Brush (Sold Individually) - 1313113
Drive Belt - 34-674
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Broken drive belt and replaced brushes
Turned over table saw removed screw and washer replaced drive belt and tighten screw and washer! done!

Turned the table saw back up unscrewed brush caps pulled out the old brushes put in new ones tighten brush cap done!

Thank you for the Delta table saw replacement parts. I believe Dewalt sold Delta a while ago and it was really hard to track down the parts until I was directed to your site by an old parts supplier for Delta.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Brush (Sold Individually) - ( 1313113 )
You need to be signed in to participate in the discussion.
You need to be signed in to particupate in the discussion.
Ask a question, answer a question, or post a comment!
  • Subject:
  •  
  • Comment:
  •  
1538424
Question: Delta Motor 1313314

1538424

will brush 1313113 work for motor 1313314
WJA
Reply: Delta Motor 1313314

WJA

Hello 1538424 ,

The Delta part number 1313113 Brush is the correct brush for the 1313314 motor.

-WJA
Product Information
Manufacturer: Porter Cable, Delta
Category Number: 1313113
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide world wide shipping icon
Repair Guides
Articles:
Quick Fix: How to Replace the Knives in a Delta TP305 Planer
If your planer knives become dull, you will want to replace them--or flip them over to the second side. This article wil...
May 30, 2012
Quick Fix: How to Replace the Drive Belt in a Delta TP305 Planer
This article outlines the very simple steps needed to replace the belt in a Delta TP305 planer. ...
April 18, 2012
fancyboxy