How to Diagnose a Bad Power Cord or Switch
This article outlines the basics of power tool and appliance electrical diagnosis. You can use a multimeter to test tool and appliance cords and switches, the two parts usually responsible for electri...
Electric Power Tool Parts 101
This article defines the basic parts of most power tools, explains how they work, and what to look for when they stop working.
Diagnosing Electric Power Tools 101
This article is a troubleshooting guide for problems and malfunctions common to most electric power tools.
Discussion
Discussion for the Bosch 11263EVS (0611263739) 1-3/4" SDS-max Rotary Hammer
I have a Bosch 11263evs hammer drill and the bits will not stay in the chuck! How do I remove chuck and also what could be causing this?
Also I have another drill that does not hammer does everything else!
I'm thinking about buying the bosch 11263evs rotary hammer, but I found out it has an automatic shutdown. I live on an island in the Bahamas and I do all my own power tool repair . I was wondering what is involved in servicing this particular tool.:confused:
Hey mdmessier
the auto shutdown actually comes from the auto-shut off brush's..once they wear down they have a push pin that comes out and push's it away from the armature..so as long as you have an extra set of brush's..[and maybe a switch] you should be ok..any other service or repair is best for a service center as it could get involved..
so how's the weather there?..I just had to put on an extra pair of socks..brrrr..:cool:
hope this helps..
Craig