*This part replaces obsolete part #: 42-66-0073 and 42-68-0071.
Product Information
Description:
| This is a genuine Milwaukee replacement part and is sold individually. Its purpose along with the 06-75-2402 Blade Clamp Screw, is to clamp the blade to the reciprocating spindle of the Milwaukee Sawzall model numbers shown below. If the blade clamp is being replaced, it advisable to replace the blade clamp screw at the same time as they are both wear parts. |
Frequently Purchased With
Compatibility
the 80 compatible machines
This part is compatible with the following machines:
Milwaukee
6507 (SER 631-1018736) Sawzall
6512 (SER 483-25000) Saw
6535-6 (SER 748E) Saw
6512 (SER 483-108000) Saw
6511 (SER 460-732526) Saw
6508 (SER 748-24000) Sawzall
6535-6 (SER 748D) Sawzall
6512-4 (SER 600B) Sawzall
6512 (SER 483-3061) Sawzall
6512-4 (SER 600A) Sawzall
6500 (SER 73-169844) Sawzall
6510 (SER 284-257845) Sawzall
6510 (SER 284-183656) Sawzall
6511 (SER 460-244899) Sawzall
6507 (SER 631B) Sawzall
6511 (SER 460A) Sawzall
6512-4 (SER 600-9400) Sawzall
6535 (SER 748C) Sawzall
6506 (SER 541-1001) Sawzall
6507-20 (SER 182A) Sawzall
6511 (SER 460C) Sawzall
6509 (SER 808-1001) Sawzall
6512-4 (SER 600C) Sawzall
6510 (SER 284-141681) Sawzall
6507 (SER 631-431000) Sawzall
6511 (SER 460-1277363) Sawzall
6511 (SER 460D) Sawzall
6535 (SER 748B) Sawzall
6511 (SER 460B) Sawzall
6507 (SER 631C) Sawzall
6512 (SER 483-47000) Sawzall
6511 (SER 460-255000) Two-Speed Sawzall
6535 (SER 305-1001) 12V Sawzall
6508 (SER 748-1001) Sawzall
6508 (SER 748-426235) Sawzall
6508 (SER 748-478116) Sawzall
6508 (SER 748A) Sawzall
6508 (SER 748B) Sawzall
6510 (Ser 284-73587) Two-Speed Sawzall
6510 (Ser 284-28166) Two-Speed Sawzall
6512 (SER 483-25000) Saw
6535-6 (SER 748E) Saw
6512 (SER 483-108000) Saw
6511 (SER 460-732526) Saw
6508 (SER 748-24000) Sawzall
6535-6 (SER 748D) Sawzall
6512-4 (SER 600B) Sawzall
6512 (SER 483-3061) Sawzall
6512-4 (SER 600A) Sawzall
6500 (SER 73-169844) Sawzall
6510 (SER 284-257845) Sawzall
6510 (SER 284-183656) Sawzall
6511 (SER 460-244899) Sawzall
6507 (SER 631B) Sawzall
6511 (SER 460A) Sawzall
6512-4 (SER 600-9400) Sawzall
6535 (SER 748C) Sawzall
6506 (SER 541-1001) Sawzall
6507-20 (SER 182A) Sawzall
6511 (SER 460C) Sawzall
6509 (SER 808-1001) Sawzall
6512-4 (SER 600C) Sawzall
6510 (SER 284-141681) Sawzall
6507 (SER 631-431000) Sawzall
6511 (SER 460-1277363) Sawzall
6511 (SER 460D) Sawzall
6535 (SER 748B) Sawzall
6511 (SER 460B) Sawzall
6507 (SER 631C) Sawzall
6512 (SER 483-47000) Sawzall
6511 (SER 460-255000) Two-Speed Sawzall
6535 (SER 305-1001) 12V Sawzall
6508 (SER 748-1001) Sawzall
6508 (SER 748-426235) Sawzall
6508 (SER 748-478116) Sawzall
6508 (SER 748A) Sawzall
6508 (SER 748B) Sawzall
6510 (Ser 284-73587) Two-Speed Sawzall
6510 (Ser 284-28166) Two-Speed Sawzall
6510 (Ser 284-247445) Two-Speed Sawzall
6500 (SER 73-86881) Sawzall
6500 (SER 73-103592) Sawzall
6505 (SER 335-1001) Electronically Controlled Sawzall
6505 (SER 335-2456) Electronically Controlled Sawzall
6505 (SER 335-4212) Electronically Controlled Sawzall
6506 (SER 541-14000) Trigger Speed Control Sawzall
6506 (SER 541-54500) Trigger Speed Control Sawzall
6507 (SER 631-1001) Trigger Speed Control Sawzall
6507 (SER 631-159357) Trigger Speed Control Sawzall
6507 (SER 631-188000) Trigger Speed Control Sawzall
6507 (SER 631-220000) Trigger Speed Control Sawzall
6507 (SER 631-349000) Trigger Speed Control Sawzall
6507 (SER 631-946110) Trigger Speed Control Sawzall
6507 (SER 631A) Trigger Speed Control Sawzall
6507 (SER 631D) Trigger Speed Control Sawzall
6507 (SER 631E) Trigger Speed Control Sawzall
6507 (SER 631F) Trigger Speed Control Sawzall
6507 (SER 631G) Sawzall
6509 (SER 808A) D.I. Sawzall
6509 (SER 808B) D.I. Sawzall
6509 (SER 808C) D.I. Sawzall
6509 (SER 808D) D.I. Sawzall
6511 (SER 460-1001) Two Speed Sawzall
6511 (SER 460-29908) Two Speed Sawzall
6511 (SER 460-130000) Two Speed Sawzall
6511 (SER 460-246188) Two Speed Sawzall
6511 (SER 460-700000) Two Speed Sawzall
6511 (SER 460-838000) Two Speed Sawzall
6511 (SER 460-1302847) Two Speed Sawzall
6512 (SER 483-1001) Two Speed Double Insulated Sawzall
6512 (SER 483-104000) Two Speed Double Insulated Sawzall
6512 (SER 483-109350) Two Speed Double Insulated Sawzall
6512 (SER 483-122000) Two Speed Double Insulated Sawzall
6512 (SER 483-159892) Two Speed Double Insulated Sawzall
6512 (SER 483-162042) Two Speed Double Insulated Sawzall
6512 (SER 483A) Two Speed Double Insulated Sawzall
6535 (SER 305-1901) 12 Volt Sawzall
6535 (SER 305-2096) 12 Volt Sawzall
6535 (SER 748A) Dual Range Vari-Speed Sawzall
6500 (SER 73-86881) Sawzall
6500 (SER 73-103592) Sawzall
6505 (SER 335-1001) Electronically Controlled Sawzall
6505 (SER 335-2456) Electronically Controlled Sawzall
6505 (SER 335-4212) Electronically Controlled Sawzall
6506 (SER 541-14000) Trigger Speed Control Sawzall
6506 (SER 541-54500) Trigger Speed Control Sawzall
6507 (SER 631-1001) Trigger Speed Control Sawzall
6507 (SER 631-159357) Trigger Speed Control Sawzall
6507 (SER 631-188000) Trigger Speed Control Sawzall
6507 (SER 631-220000) Trigger Speed Control Sawzall
6507 (SER 631-349000) Trigger Speed Control Sawzall
6507 (SER 631-946110) Trigger Speed Control Sawzall
6507 (SER 631A) Trigger Speed Control Sawzall
6507 (SER 631D) Trigger Speed Control Sawzall
6507 (SER 631E) Trigger Speed Control Sawzall
6507 (SER 631F) Trigger Speed Control Sawzall
6507 (SER 631G) Sawzall
6509 (SER 808A) D.I. Sawzall
6509 (SER 808B) D.I. Sawzall
6509 (SER 808C) D.I. Sawzall
6509 (SER 808D) D.I. Sawzall
6511 (SER 460-1001) Two Speed Sawzall
6511 (SER 460-29908) Two Speed Sawzall
6511 (SER 460-130000) Two Speed Sawzall
6511 (SER 460-246188) Two Speed Sawzall
6511 (SER 460-700000) Two Speed Sawzall
6511 (SER 460-838000) Two Speed Sawzall
6511 (SER 460-1302847) Two Speed Sawzall
6512 (SER 483-1001) Two Speed Double Insulated Sawzall
6512 (SER 483-104000) Two Speed Double Insulated Sawzall
6512 (SER 483-109350) Two Speed Double Insulated Sawzall
6512 (SER 483-122000) Two Speed Double Insulated Sawzall
6512 (SER 483-159892) Two Speed Double Insulated Sawzall
6512 (SER 483-162042) Two Speed Double Insulated Sawzall
6512 (SER 483A) Two Speed Double Insulated Sawzall
6535 (SER 305-1901) 12 Volt Sawzall
6535 (SER 305-2096) 12 Volt Sawzall
6535 (SER 748A) Dual Range Vari-Speed Sawzall
Products Compatibility
This item works with the following types of products:
- • Saw
Questions & Answers for Blade Clamp
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
17 of 19 people found this instruction helpful
Tool Type:
Reciprocating Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allenn wrech
Needed a blade clamp and locking bolt for Sawzall
Place the bolt into the hole of the clamp and screw into the threaded hole on the shaft of the Sawzall, making certain the plug is not plugged in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
6 of 7 people found this instruction helpful
Tool Type:
Reciprocating Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Wouldn't hold a blade
Removed screw, replaced clamp, replaced screw. Too easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Blade clamp broke
Installed on saw shaft , then tightened allen screw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Reciprocating Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blade clamp lost and shoe bent.
Very easy repair. Screw the blade clamp on the shaft with the screw. Then I replaced the shoe with the four screws still on the saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Reciprocating Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
I installed a new blade clamp with a allen screw
It was very easy to put new blade clamp in place and screw down tight with allen screw. All done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Tip holding blade worn to point would not hold blade
R&R blade clamp
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Blade hold down screw stripped out
Replaced screw and clamp
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Sawzall not cutting straight
Removed 4 Alan screws, removed old pivot shoe. Put new shoe in place and re-installed allen screws. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Circular Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
The blade kept coming loose on the sawzall
Found the blade clamp had a crack in it replace the clamp & the bolt the blades stay tight while using the sawzall
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hex wrench
The clamp for my sawzal
Put clamp on and inserted a blade and I was done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
24 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
22
4 stars
1
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
- 2
- 3
The right part delivered in a timely manner.
The part fit and enabled the tool to function again.
Wallace -
July 17, 2023
Verified Purchase
Thanks for the part, work great
Thanks again
Guest -
January 25, 2023
Verified Purchase
Part exact drop in to repair quickly
Part arrived I unpacked it and installed it. Then started a large demolition project.
Thanks for the quick fix.
william -
December 13, 2022
Verified Purchase
Fit right on sawzall
Had not used sawall in years . Broke lock and did not know it was available. Fit right on ,works great thanks
Guest -
October 13, 2022
Verified Purchase
At last ,part is found!!!!!!
I was looking for this part for a long time. Very happy 😊 to find it at last!!!! Thank you, now I can used my Sawzall again.
Guest -
March 23, 2022
Verified Purchase
Just right
My 30 year old Sawzall all works perfectly now. Blades stay tight.
Guest -
February 22, 2022
Verified Purchase
Always Available
e-Replacement Parts is always my first choice for needing replacement parts. Can't remember last time they didn't have what I wanted. This time a 35 year old Milwaukee Sawzall power tool had a broken part. They came through and shipped promptly.
Chip -
August 28, 2021
Verified Purchase
They have the repair item you need
They have old and obscure parts for my 'vintage' power tools. Great prices and fast shipping.
Three dollar part that cost more to ship but it's necessary for the reciprocating saw to do its job.
Sure glad these folks are in business.
Guest -
August 2, 2021
Verified Purchase
Fast easy replacement for repair
The part fit perfectly, fast service, reasonable cost replacement
Guest -
April 26, 2021
Verified Purchase
1st time using replacement parts and will be using anytime I can
Part worked great!
Guest -
May 29, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
