Repair Parts Home Appliance Parts Black and Decker Parts Black and Decker Vacuum Parts
Black and Decker HV9010P Type 1 Corded Pet Vacuum Parts
How to Replace a Vacuum Power Cord
Replace your vacuum's power cord with these simple repair steps, a smart way for vacuum owners to save time and money at the repair shop.
How to Replace a Vacuum Belt
Simple vacuum repairs can be performed at home, and knowing how to change a vacuum belt is a great way for any vacuum owner to save time and money at the shop.
Power Tool Care and Maintenance 101
This article suggests guidelines for power tool care and maintenance. It also describes information tools available at eReplacementParts.com.
Discussion for the Black And Decker HV9010P Type 1 Corded Pet Vacuum
Post a Comment
Ask a question, answer a question, or post a comment!
Question: Black & Decker Dust Buster ...
Do the Black and Decker Dust Buster Type 1 and the Type 3 have different filters?
When I put the part number in your system the type 1 comes up but my model number tag has Type 3 on it. The type 1 looks like the one I have but I am afraid to get the wrong filters.
Reply: Black & Decker Dust Buster ...
I have looked for a HV9010P Type 3 and cannot locate one. Just go ahead a order the part you need for the type 1 and if they aren't they right ones. Just call us and we will return for you at no cost.
Hope this helps,
I have a hv9010p vac. I'd like to order some of the accessories to a hv9010 to use with my vac. Can't find them online. Only the one I have. Where can I find the hv9010 accessories for sale?
were you able to find them?
Question: Vaccum Turn Off
My vacuum shuts off after 1 or 2 minutes of work. I have to wait half an hour to be able power on again.
Reply: Vaccum Turn Off
When the motor over heats, it shuts off to prevent damage. When it as cooled, it will come back on. Clean your filters and see if that helps since it should not overheat that fast. Clogged filters also reduces the suction. Take it back if that does not work. You must clean your filters each time you use it however. When it is really dirty I use a fingernail brush and water to clean the outer filter and unclog the holes. I wash the exhaust filter also. You may be able to wash the 2nd cone filter also but I use a toothbrush and brush it off outside. You could used a blower to blow from the inside out to clean also but I would wear a mask. You can buy replacement filters.
Question: Pet Attachment
The roller brush won't spin. Is there a belt that goes in there?
I can't seem to find it on the parts sheet. It looks like there should be one. Thanks.
Reply: Pet Attachment
There are no separate parts available for the brush attachment. However, the brush attachment is available as a entire assembly. The brush is part #5140048-65 and is available from http://www.ereplacementparts.com.