eReplacementParts.com
877-346-4815
DeWALT Parts
Repair Parts Home
  
Power Tool Parts
  
DeWALT Parts
  605040-65 Ball Bearing

Ball Bearing 605040-65

OEM part for: DeWALT, Porter Cable, Black and Decker

Part Number: 605040-65


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Ships within 1 business day
Easy 15-30 minutes (7 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALTPorter CableBlack and Decker
Does this d-block d-md-none fit my product?

Product Description ?

This Ball Bearing is sealed on both sides. It is a genuine DeWalt replacement part and is sold individually.

  • Ball bearings are used to reduce friction between rotating parts..
    The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction.
    This reduces wear on the tool and allows it to run smoothly.
  • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

    • Classification: Part
    • Weight: 0.01 lbs.
    • Shipping: Ships Worldwide

    Frequently Purchased Together ?

    Compatibility

    This part will fit the following 20 machines

    DeWALT

    D28770 Type 1 VS Band Saw View Diagrams & Manuals
    DWM120 Type 1 Band Saw View Diagrams & Manuals
    DWE6000 (Type 1) Laminate Trimmer View Diagrams & Manuals
    D28770K (Type 1) Deep Cut Variable Speed Band Saw View Diagrams & Manuals
    DWM120K (Type 1) Deep Cut Band Saw View Diagrams & Manuals
    DCS374B (Type 1) 20v Deep Cut Ban Sa View Diagrams & Manuals
    DCS374P2 (Type 1) 20v Deep Cut Ban Sa View Diagrams & Manuals
    DCS376B (Type 1) 20v Max Dual Switch Band Saw Kit Power Tool View Diagrams & Manuals
    DCS376P2 (Type 1) 20v Max Dual Switch Band Saw Kit Power Tool View Diagrams & Manuals
    DWM120 (Type 2) Band Saw Power Tool View Diagrams & Manuals
    DWM120K (Type 2) Band Saw Power Tool View Diagrams & Manuals
    DW862-AR (Type 11) Tile Cutter 125mm 1400w Power Tool View Diagrams & Manuals
    DW862-B3 (Type 11) Tile Cutter 125mm 1400w Power Tool View Diagrams & Manuals
    DWE6000-B2 (Type 1) Laminate Trimmer Power Tool View Diagrams & Manuals
    DWE6000-B3 (Type 1) Laminate Trimmer Power Tool View Diagrams & Manuals
    DWE6000-BR (Type 1) Laminate Trimmer Power Tool View Diagrams & Manuals

    Porter Cable

    PCE6430 (Type 1) Laminate Trimmer View Diagrams & Manuals
    PCE6435 (Type 1) Laminate Trimmer View Diagrams & Manuals

    Black and Decker

    BD115-B2 (Type 10) Tile Cutter 1100w Power Tool View Diagrams & Manuals
    BD115-BR (Type 10) Tile Cutter 1100w Power Tool View Diagrams & Manuals
    Show More Compatible Models
    Don't see yours? Try searching our site for :

    This item works with the following types of products:

    • Band Saw Parts
    • Saw Parts
    • Laminate Trimmer Parts

    This part replaces obsolete part #: 5140021-76

    Repair Videos ?

    Watch the Repair Video for Ball Bearing

    Customer Part Reviews ?

    5
    Average Rating (out of 5):
    3 Reviews
    Click to filter by ratings:
    5 stars
    3
    4 stars
    0
    3 stars
    0
    2 stars
    0
    1 stars
    0
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
  • Great service and very helpful and friendly people
    g
    Guest - December 8, 2021 Verified Purchase
    Very good
    Very good parts got Quality
    Guest - March 1, 2021 Verified Purchase
    Great parts!
    The parts I was looking for were easy to find and they came as expected on time and exactly what I ordered!
    Guest - February 15, 2020 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Ball Bearing


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy 15-30 minutes (7 rated repairs)?

    One of the bearings had broken while in use, not allowing the saw blade to properly track from horizontal to vertical through the cut zone.

    Willie - October 7, 2016
    👍 2 of 2 people found this instruction helpful
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    1. Made sure the band saw was unplugged.
    2. Removed band saw blade following mfg instructions.
    3. Removed the retaining screw holding the broken bearing.
    4. Installed the new bearing with the other good bearing on the screw.
    5. Reinstalled the screw with bearings on the shaft and tightened to spec.
    6. Reinstalled band saw blade per mfg instructions.
    7. Plugged band saw in and checked for blade running true with no binding in bearing area.
    8. Put unit back in service.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Blade not tracking, worn parts

    peter - June 20, 2016
    👍 1 of 1 people found this instruction helpful
    Removed the old bearing blocks by removing the screws holding them to the saw. Then replaced all of the bearings on the blocks. Punched out the pins in the block out to install the back bearings. Then installed the new assemblies back on the saw. I then removed the old tires from the pulleys and installed the new tires. I removed the screw from the tension lever and replace it and the lever. Installed a new blade, adjusted the tension. Now it tracks like a new saw.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Guide Bearings were shot

    Brian - December 7, 2022
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Changed out the worn out bearings
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Screws came loose on the bearing block and one of the holes was stripped

    Joe - February 4, 2022
    Took the bearing block off and replaced it and used the new screws to put it back together. It was a easy fix
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The "tires" on both wheels had melted and were a gooey mess. It was simpler to replace them and the bearings.

    William - December 27, 2020
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Socket set, Nutdriver

    1. Remove the tension on the band blade and remove it
    2. Remove the fasteners on both wheels and pull them out
    3. Remove the fasteners on the vertical bearings and pull them out
    4. Remove the fasteners on the horizontal bearings and pull them out
    5. Clean all remaining gunk from surfaces using Brakleen
    6. Apply a thin coating of oil to rotating parts
    7. Reassemble
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    #1--Name is not Terry 2--these parts were for resale. 3-- Saw needed rebuild.

    Terry - February 10, 2020
    1.--finish I gave the parts to my customer who gave them to his maintenance man.

    Port-A-Band fixed.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    band saw gears stripped/ blade wonder

    cody - September 16, 2019
    Tool Type

    Band Saw

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver

    remove drive wheel replace sprocket, rubber bands/wheels replace guide bearings
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal