*This part replaces obsolete part #: 1801711000.
Product Information
Description:
This is a high-quality component which is made for Dirt Devil and Royal vacuums. It is supplied from the original equipment manufacturer. The cap is utilized to secure the wheel on the axle. If the cap is damaged or missing, this part will provide an identical replacement. Make sure to check the diagrams for your specific model for the correct installation of the new component. This high-quality wheel retainer cap is made of durable material and is sold as an individual item. Replacing it is a simple task that should only require pliers. |
Compatibility
the 20 compatible machines
This part is compatible with the following machines:
Dirt Devil
MCE6200 Easy Steamer Carpet Cleaner
MCE6300 Easy Steamer Carpet Cleaner
MCE7300 Easy Steamer Carpet Cleaner
MCE7350 Vision Easy Steamer
MCE6300 Easy Steamer Carpet Cleaner
MCE7300 Easy Steamer Carpet Cleaner
MCE7350 Vision Easy Steamer
M088750 Powerlite Bagless Upright Vacuum
M088760 Powerlite Bagless Upright Vacuum
MCE7450 Vision Easy Steamer
M088760 Powerlite Bagless Upright Vacuum
MCE7450 Vision Easy Steamer
Royal
Products Compatibility
This item works with the following types of products:
- • Lawn Tractor
- • Vacuum
Questions & Answers for Wheel Retainer Cap
Don't you think 399.00 dollers for shipping is a tad expensive
Greyton
asked on 2023-02-22
Hello Greyton, Thank you for your inquiry. Shipping charges are based on your zip code and what we are charged for shipping by the carriers. We try to keep our shipping prices as low as possible, but do also have to keep them at a level to help cover our shipping and handling costs. We hope this helps to explain the reasoning behind the prices!
eReplacementParts Team February 22, 2023
Repair Instructions: Submitted by Customers Like You
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hammer and ratchet extension
Wheel retainer cap fell off and could not be re-fastened
Placed the retainer cap on the axle and hammered it in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hammer
Wheel retainer cap cam off and got lost.
Set vacuum on it's side, aligned wheel and gently tapped on retainer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Hammer
Our vacuum cleaners front wheels were falling apart. The plastic wheels became brittle over time.
1. Remove the vacuum bag.
2. Set the vacuum on the counter on its side.
3. Use a screw driver to remove the cap to reveal the inside retaining cap.
4. Use pliers to pull retainer cap off and discard cap.
5. Replace wheel
6. Put new retaining cap on axle stud.
7. Hold cap in place with pliers and hit with hammer to secure onto axle.
Repeat for next wheel.
2. Set the vacuum on the counter on its side.
3. Use a screw driver to remove the cap to reveal the inside retaining cap.
4. Use pliers to pull retainer cap off and discard cap.
5. Replace wheel
6. Put new retaining cap on axle stud.
7. Hold cap in place with pliers and hit with hammer to secure onto axle.
Repeat for next wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Hand
Rear vacuum wheels broke from being dropped.
Removed retainer cap slid wheels on and put new push nuts on axle. Very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information