Medium
15-30 minutes
This is a high-quality OEM component which is specially made for use with Breville coffee makers. It is utilized to provide a tight seal for the water tank. Unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. To ensure the exact location and the correct installation of the new part, please refer to the appropriate diagrams of your model. One durable rubber water inlet seal is included. You will need a screwdriver to take the housing apart in order to replace this component.
Water Inlet Seal SP0001510
OEM part for: Breville
Part Number: SP0001510
$9.69
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 4 machines
Breville
BES860XL Barista Express View Diagrams & Manuals
BES840 Infuser Espresso Machine View Diagrams & Manuals
BES840XL Infuser Espresso Machine View Diagrams & Manuals
BES870XL The Barista Express View Diagrams & Manuals
This item works with the following types of products:
- Espresso Parts
This part replaces obsolete part #: BES840XL248, SP0013709, BES870XL/12.43, BES840XL/248, BES860XL/08.9
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
14
4 stars
0
3 stars
1
2 stars
0
1 stars
1
< PREV
- 1
- 2
Best part, perfect fit!
Exactly part I was looking for ,perfect fit! No more water under unit.
Guest -
December 30, 2023
Verified Purchase
Quick delivery.
The part fit perfectly.
Guest -
March 22, 2023
Verified Purchase
good fit part good price and fast shipper
good fit worked well
Guest -
January 18, 2022
Verified Purchase
Worked perfectly!
A little tricky to install, but the part worked perfectly and no more leaks!
Guest -
November 16, 2021
Verified Purchase
The part arrived early
Ordering was easy and the part arrived earlier than expected
Guest -
October 2, 2021
Verified Purchase
Fast Delivery. Came sooner than expected
The part was exactly as described and the price was more than fair. Now my Breville does not leak anymore.....I highly recommend working with these folks.
Two thumbs up!!
Guest -
April 24, 2021
Verified Purchase
Breville Water Seal Replacement
Part arrived quickly and resolved my water tank leaking issue. Relatively easy to install. Not all people will have proper small screwdrivers.
Only thing I can say that was surprising was that shipping the cheapest way was twice the cost of the part.
Guest -
June 30, 2020
Verified Purchase
Perfect fit, low price, S/H expensive
Overall happy with part. Website very helpful for finding the right part
Guest -
June 22, 2020
Verified Purchase
Super quick response.
My espresso machine was leaking. Bought this seal from ereplacementparts. Their website was easy to navigate. The price was very reasonable. I picked the cheapest shipping option, and got the part in a 4 or 5 days. Very happy with this transaction. Machine working perfectly again.
Guest -
June 5, 2020
Verified Purchase
works
arrived and it fits
Guest -
May 28, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Water Inlet Seal
Hi, Is this the proper part for the Breville Bambino Plus? Model BES500 BSS. Thanks, Jeff
Jeff
for model number BES500 BSS
asked on 2022-12-08
Hello Jeff, Thank you for writing. Sadly, the part you are requesting we do not have listed for your model. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
eReplacementParts Team December 08, 2022
I think my water tank valve needs to be replaced. Leaks water all over from the back about 3-8 minutes after use. Coffee comes out fine with good pressure. There is a slight issue also w the water in the front (to fill an americano) it sometimes doesn't come out in a nice stream, sometimes it comes out with a lot of air even after the :30 seconds or so that it should take to clear any air from using the wand. What needs to be replaced?
Liz
for model number BES870XL
asked on 2022-02-08
Hello Liz, Thank you for the question. This is normally an indication the valve needs to be replaced. We also suggest checking the water lines for wear or damage. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team February 08, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Water was leaking form the reservoir tank where is sits on the espresso machine
Jim - July 13, 2016
👍 24 of 24 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Watched a video on eReplacement Parts to figure out how to open up the machine. I was expecting it to be a difficult and time consuming repair. Turned out you could do it in about 5 to 10 minutes max, except I did have one problem. The middle screw on my machine under the tank had rusted quite a bit from the leak and was difficult to remove. I thought I had stripped to screwdriver slot which would have made the job significantly more difficult. I was thinking how to drill out the screw, when I simply got a better screwdriver and was able to remove the screw to access the leaking gasket/washer. Once opened, it was apiece of cake. Working great now and no leaks.
Thanks eReplacemetn for having the part and for providing "how-to" videos.
Thanks eReplacemetn for having the part and for providing "how-to" videos.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Water reservoir leaked
Gary - March 5, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
Remove 9 screws, replaced seal, reassemble
Did you find this story helpful?
Thanks for voting and helping fellow customers!
water tank was leaking from the valve
Claire - March 25, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Espresso
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
to access the water valve, I had to unscrew the screws holding the top and then remove the caps over the screws holding the back on and remove this screws. then from under the water valve- I removed the 2 screws fro there and replaced the water seal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Espresso machine leaking.
Linda - December 20, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Espresso
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Took apart and replaced with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
seal failed after 8 years of constant use.
Randy - April 8, 2019
Tool Type
Espresso
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill
Parts Used
The only problem with this repair was that since the water was able to leak down into the screw that held the part on and the tops where completely rusted. I was forced to drill them out completely. Which really doesn't affect anything with the machine. Or it would have been a pretty straight forward repair will little complexity.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leaking water under Barista Express unit
Jamin - January 18, 2019
Tool Type
Espresso
Difficulty
Hard
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
To replace the inlet seal, I had to unscrew three screw from the front interface, then remove water tank to get to 6-9 more screws, so the whole inside was accessible. At that point, I left the water hose attached to inlet fixture but unscrewed it from underneath the water tank. From there, I just swapped the old rubber o ring with new one. Put it back together.
I also re-snapped the plastic undercarriage in a plcae where it wasn't attached. Did a big clean cycle with vinegar, letting soak for 12 hours, then refilled with regular filtered water. One of these three things fixed my leak.
I also re-snapped the plastic undercarriage in a plcae where it wasn't attached. Did a big clean cycle with vinegar, letting soak for 12 hours, then refilled with regular filtered water. One of these three things fixed my leak.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Water leaks from the bottom of the tank where the water inlet seal locate.
Anthony - February 19, 2018
Tool Type
Espresso
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
I watched the YouTube video from ereplacement post on YouTube to diagnose the my espresso machine problem. From there, I ordered the part and 10 days later the parts arrived, after I replaced the problem solved. The machine work like a dream....thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Espresso machine was leaking water
Jennifer - October 19, 2017
👍 2 of 4 people found this instruction helpful
Tool Type
Espresso
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver
Parts Used
Followed the video on your side for hose replacement to figure out how to remove the covers. It was not as easy as described. The screws were really tight and one snapped in half. We replaced the seal pretty easily and put it all back together. Worked perfectly.
https://www.youtube.com/watch?v=V-WCjDRRFFw
https://www.youtube.com/watch?v=V-WCjDRRFFw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The water came out from the lower area of the espresso machine.
Rafael - July 31, 2017
Tool Type
Espresso
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Small plastic tie.
1. Remove the plastic tank and upper part of coffee grinder.
2. Remove all screws from the back side including three covered with plastic caps.
3. On the base of the back side, you can see the black inlet seal. Remove the silicone tube first by removing the plastic ties then remove the two screws below to replace the water seal.
4. Then, put back all the pieces. You will need a small plastic tie to keep the silicone tube in place and avoid leakage. If you have the problem in this way then you must have to remove the large silicone tube with the inner water filter with its attached tubes to work more comfortable, but you will need to use more plastic ties to put back the tubes.
2. Remove all screws from the back side including three covered with plastic caps.
3. On the base of the back side, you can see the black inlet seal. Remove the silicone tube first by removing the plastic ties then remove the two screws below to replace the water seal.
4. Then, put back all the pieces. You will need a small plastic tie to keep the silicone tube in place and avoid leakage. If you have the problem in this way then you must have to remove the large silicone tube with the inner water filter with its attached tubes to work more comfortable, but you will need to use more plastic ties to put back the tubes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
