Washer-flat 3256-24

Screw-hh - 323-7

Washer-friction, Composite - 114-0463

Spacer - 115-4986

Nut-flange, Ni - 104-8301

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Spray lube

Tension pulley wore out and popped off. Replaced all on deck while repairing the one.

Hardest part was reaching between deck and mower frame. But was less time consuming than dropping and pulling deck out. Used pliers to unhook tension spring then removed pulleys. Similar step to replace.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Wrench Set

bolt had broken on idler pulley and belt had fallen off

i had to pull the deck off and drill out the broken bolt. i cleaned the deck underneath and replaced two pulleys and the belt, reinstalled the deck.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Nut-lock, Ni - 3296-39

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set, Wrench Set

Idler pulley bushing failed

Removed old nut and washer. Old pulley already off of zero turn
Installed new pulley washer and lock nut
Reinstalled drive belt.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Compression Spring - 39-9650

Nut-lock, Ni - 3296-16

Retaining Ring - 65-2720

Thrust Washer - 105-6840

Key - 612066

Washer-plain - 105-6814

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Air wrench

Mower Belt, washers worn

Had to remove wheels,belt cover and blade to replace key springs, new belt and lube rear wheels after cleaning said parts.
I would never do this job as shown in tutorial and feel it's necessary to remove both wheels ,blade belt shroud and rear wheel holders and use new washers and bearings to give the job more/longer service.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Screw-shoulder - 114-3467

Nut - 603773

Knob-hoc - 110-0549

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set, Adjustable Wrench

One of the front wheels broke off

The bolt that held the wheel on broke. I ordered the replacement bolt, nut & washer for my make/model lawn mower and used the wrenches to re-attach the wheel.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Screw-shoulder - 114-3467

Knob Lever - 105-3042

Nut - 603773

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set, Adjustable Wrench

The bolt that attaches the whole wheel and height control cracked in two.

1. Went to your site to look at which parts had been there before they broke off and fell somewhere in the yard.
2. Ordered the parts and waited them to arrive.
3. Unscrewed the bolt-shoulder from the cutting height mechanism (a.k.a. arm pivot), allowing me to remove the wheel.
4. Slipped the new bolt that had been cracked (screw-shoulder) into the arm pivot.
5. Re-attached the wheel.
6. Slip the spacer-wheel over the screw-shoulder.
7. Slip the screw-shoulder through the hole in the chassis.
8. Place the washer-flat on the screw-shoulder
9. Screw on the nut to the screw-shoulder.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Mower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Idler pulley broke.

Socket set, took out old bolt and washer out and replaced with new pulley and bolt. I then put the belt back over the idler pulley and started cutting grass for 2 hours.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Lawn Tractor

Parts Used:

Nut-lock, Ni - 3296-39

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set

Replaced belt tension pulley

Removed the old pulley, replaced with the new one.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

0 of 1 people found this instruction helpful

Tool Type:

Lawn Tractor

Parts Used: