Voltage Regulator 205858GS
Part Number: 205858GS
Order within the next 5 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 202165GS, 195011GS, 200962GS, 189769GS and 198339GS.
Product Information
Description:
This authentic replacement part is specially designed for Briggs and Stratton generators. It is supplied from the original equipment manufacturer. This is an important component of the unit which regulates the voltage. Over time it may develop electrical or mechanical issues eventually requiring a replacement. This high-quality component is sold as an individual item. Make sure to refer to the owners manual and the diagrams of your model for the exact location and the correct application of this regulator. You will need a screwdriver and a wrench set to remove the housing in order to perform this repair. |
Frequently Purchased With
Compatibility
the 66 compatible machines
This part is compatible with the following machines:
Briggs and Stratton
040243-0 Generator
040243-1 Generator
030210-1 Portable Generator
030210-2 Portable Generator
030211-0 Portable Generator
030211-1 Portable Generator
030213-0 Portable Generator
030216-0 Portable Generator
030216-1 Portable Generator
030220-0 Portable Generator
030221-0 Portable Generator
030228-0 Portable Generator
030231-0 Portable Generator
030236-0 Portable Generator
030237-0 Portable Generator
030244-0 Portable Generator
030201-0 Portable Generator
030244-2 Portable Generator
030247-0 Portable Generator
030247-1 Portable Generator
030247-2 Portable Generator
030254-0 Portable Generator
030297-0 Portable Generator
030335-0 Portable Generator
030336-0 Portable Generator
030337-0 Portable Generator
030338-0 Portable Generator
030339-0 Portable Generator
030340-0 Portable Generator
030342-0 Portable Generator
030344-0 Portable Generator
030345-0 Portable Generator
040243-1 Generator
030210-1 Portable Generator
030210-2 Portable Generator
030211-0 Portable Generator
030211-1 Portable Generator
030213-0 Portable Generator
030216-0 Portable Generator
030216-1 Portable Generator
030220-0 Portable Generator
030221-0 Portable Generator
030228-0 Portable Generator
030231-0 Portable Generator
030236-0 Portable Generator
030237-0 Portable Generator
030244-0 Portable Generator
030201-0 Portable Generator
030244-2 Portable Generator
030247-0 Portable Generator
030247-1 Portable Generator
030247-2 Portable Generator
030254-0 Portable Generator
030297-0 Portable Generator
030335-0 Portable Generator
030336-0 Portable Generator
030337-0 Portable Generator
030338-0 Portable Generator
030339-0 Portable Generator
030340-0 Portable Generator
030342-0 Portable Generator
030344-0 Portable Generator
030345-0 Portable Generator
030358-0 Portable Generator
030359-0 Portable Generator
030373-0 Portable Generator
030374-0 Portable Generator
030375-0 Portable Generator
030207-0 Portable Generator
030381-0 Portable Generator
030382-0 Portable Generator
030383-0 Portable Generator
030384-0 Portable Generator
030385-0 Portable Generator
030386-0 Portable Generator
030387-0 Portable Generator
030419-0 Portable Generator
030426-0 Portable Generator
030432-0 Portable Generator
1893-0 Portable Generator
1894-0 Portable Generator
1894-1 Portable Generator
1925-0 Portable Generator
1925-1 Portable Generator
1932-0 Portable Generator
1932-1 Portable Generator
1933-0 Portable Generator
1933-1 Portable Generator
1934-0 Portable Generator
1934-1 Portable Generator
1934-2 Portable Generator
1935-0 Portable Generator
1935-1 Portable Generator
030242-0 6,200 Watt Generator
030207-01 10,000 Watt Generator
030359-0 Portable Generator
030373-0 Portable Generator
030374-0 Portable Generator
030375-0 Portable Generator
030207-0 Portable Generator
030381-0 Portable Generator
030382-0 Portable Generator
030383-0 Portable Generator
030384-0 Portable Generator
030385-0 Portable Generator
030386-0 Portable Generator
030387-0 Portable Generator
030419-0 Portable Generator
030426-0 Portable Generator
030432-0 Portable Generator
1893-0 Portable Generator
1894-0 Portable Generator
1894-1 Portable Generator
1925-0 Portable Generator
1925-1 Portable Generator
1932-0 Portable Generator
1932-1 Portable Generator
1933-0 Portable Generator
1933-1 Portable Generator
1934-0 Portable Generator
1934-1 Portable Generator
1934-2 Portable Generator
1935-0 Portable Generator
1935-1 Portable Generator
030242-0 6,200 Watt Generator
030207-01 10,000 Watt Generator
Snapper
Products Compatibility
This item works with the following types of products:
- • Generator
Questions & Answers for Voltage Regulator
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
12 of 14 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set
No power produced
Remove rear of generator by unscrewing four nuts, remove cover, remover controller, remove wires and reconnect to new controller once completed wrap wires around board as you found on the old board. Refit and replace covers. Have all the power I need now. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
9 of 10 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Pliers, Socket set, Nutdriver
No power output on customer's John Deere 6200 portable generator
1. Check for power output at receptacles (No go)
2. R&R end cover & generator end plate. Clean slip rings on rotor. Check brushes for proper contact.
3. Check for min. AC output from rotor and stator while running. (OK)
4. Replace AVR. Check for generator output. (No go)
5. Disconnect + and - leads from brush block. Start generator and flash rotor with 12vdc.
6. Re-connect brush leads and re-start. Check for output. (OK!)
NOTE: On this type of AVR *always* make sure all leads go to the proper terminals. The AC voltage sense and AC input to the AVR are different size terminals, but it is still possible to get the individual leads mixed up and the generator won't put out at governed speed. Be sure to follow the instruction sheet exactly on the positions of the voltage sense & AC input wires to the AVR! (The wires have numbers printed on the insulation)
2. R&R end cover & generator end plate. Clean slip rings on rotor. Check brushes for proper contact.
3. Check for min. AC output from rotor and stator while running. (OK)
4. Replace AVR. Check for generator output. (No go)
5. Disconnect + and - leads from brush block. Start generator and flash rotor with 12vdc.
6. Re-connect brush leads and re-start. Check for output. (OK!)
NOTE: On this type of AVR *always* make sure all leads go to the proper terminals. The AC voltage sense and AC input to the AVR are different size terminals, but it is still possible to get the individual leads mixed up and the generator won't put out at governed speed. Be sure to follow the instruction sheet exactly on the positions of the voltage sense & AC input wires to the AVR! (The wires have numbers printed on the insulation)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Nutdriver, Lever for controlling height of generator relative to frame
Generator failed to output power
1. Unbolted wired end of generator end housing from frame.
2. Removed four long screws holding the end housing to the rest of the generator assembly
3. Used lever to raise the generator housing (and generator up to clear the frame).
4. Removed housing from the stator/rotor assembly
5. Followed the attached instruction sheet for the voltage regulator
5a. Discarding the "booster" previously undefined by the manufacturer. Part of the sheet instructions.
6. Reassembled in the reverse order.
7. Tested = OK
2. Removed four long screws holding the end housing to the rest of the generator assembly
3. Used lever to raise the generator housing (and generator up to clear the frame).
4. Removed housing from the stator/rotor assembly
5. Followed the attached instruction sheet for the voltage regulator
5a. Discarding the "booster" previously undefined by the manufacturer. Part of the sheet instructions.
6. Reassembled in the reverse order.
7. Tested = OK
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Generator
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
Generator did not put out 120 volts
I took cover of generator off replaced the avr and the brushes and put everything back on started the generator up and checked it ready to go
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Nutdriver
No voltage output
Remove end cover on generator.
Unplug old PC board
Plug in new PC board
Slide PC board into locator slots
Reinstall end cover
Unplug old PC board
Plug in new PC board
Slide PC board into locator slots
Reinstall end cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Generator
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
No power
Replaced the old parts with the new ones followed instructions that came with the parts . All went well generator now puts out electricity problem fixed. Advice take photo of wiring so everything go's back the same way. Reair was very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Voltmeter
No voltage output
1 Removed generator end cover.
2 Transfer wires one at a time to new AVR.
3 Slide AVR in slot.
4 Remove old brush leads .
5 Add new brush leads.
6 Put cover back on,
7 Test for voltage..
2 Transfer wires one at a time to new AVR.
3 Slide AVR in slot.
4 Remove old brush leads .
5 Add new brush leads.
6 Put cover back on,
7 Test for voltage..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Generator
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Small alligator clip jumper cables
No output from generator
1. Removed generator cap using 8mm socket set
2. Removed and replaced old AVR and brush assembly
3. Followed included instructions to remagnetize brush assembly by using small alligator 4. Clip jumper cables (not included) to connect positive and negative leads of brushes to a positive and negative posts of a 12 V battery (not included).
5. Started and ran the generator for a few seconds.
6. Removed jumper cables.
7. Reconnected lead wires.
8. Re-installed the cap.
9. Started generator and now works as good as new!
2. Removed and replaced old AVR and brush assembly
3. Followed included instructions to remagnetize brush assembly by using small alligator 4. Clip jumper cables (not included) to connect positive and negative leads of brushes to a positive and negative posts of a 12 V battery (not included).
5. Started and ran the generator for a few seconds.
6. Removed jumper cables.
7. Reconnected lead wires.
8. Re-installed the cap.
9. Started generator and now works as good as new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Generator put out no power when running
1. Remove plastic cap/vent off the end of generator
2. Remove and replace brush assembly, being sure to connect wires correctly
3. Remove the old voltage regulator and booster (if equipped), replacing both items with the voltage regulator as described in the directions included with the new voltage regulator
4. Start generator and retest for proper function (electrical output)
2. Remove and replace brush assembly, being sure to connect wires correctly
3. Remove the old voltage regulator and booster (if equipped), replacing both items with the voltage regulator as described in the directions included with the new voltage regulator
4. Start generator and retest for proper function (electrical output)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Generator
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Nutdriver
Generator wouldn't produce power
It took & 5 minutes to replace the part
I took the back cover off the generator, slid the old regulator out unplugged it, slid the new one in, plugged it up, put the cover back on, works good,
I took the back cover off the generator, slid the old regulator out unplugged it, slid the new one in, plugged it up, put the cover back on, works good,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Portable generator
Fit perfect.
Package arrived in reasonable time.
Price was a little bit more then expecting.
Over all I'm happy.
Fixed my generator.
Guest -
January 20, 2023
Verified Purchase
Easy repair great parts- works!!!
Excellent !!!!Generator Works!!!
Guest -
September 19, 2020
Verified Purchase
fast shipping, part is correct one.
Part fit correctly and had good instructions with pictures
Bob -
September 1, 2020
Verified Purchase
very easy repair and so far good part. Very good instructions.
arrived quickly, great part and instructions very precise. Would buy it again.
Guest -
June 25, 2020
Verified Purchase
Excellent service
Part was OEM and worked great.
Sales lady was excellent in helping me figure out what I needed and finding the part. I will definitely be back.
Guest -
November 9, 2019
Verified Purchase
Ram mirror.
Received on schedule, not damaged but poorly packaged the box was in rough shape.
john -
September 6, 2021
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information