*This part replaces obsolete part #: 13904 (Velcro-style, 5 vacuum holes).
Product Information
Description:
This 5" sander pad is a genuine OEM replacement part that is specially made for Porter Cable random orbit palm sanders. It is used to secure the hook and loop PSA style sandpaper, over time this part will wear out and it will need to be replaced. Changing the pad is an easy task that will only require a screwdriver. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 16 compatible machines
Products Compatibility
This item works with the following types of products:
- • Sander
Questions & Answers for 5 Pad Holes
What is PSA? I have this sander and need to replace the sticky paper disc. I don't think the Hook and Loop is what I'm looking for. I'm having trouble finding the right disc.
Joe
for model number 334 5 Random Orbit Sander
asked on 2024-01-16
PSA or "pressure-sensitive adhesive" is that sticky sort of sandpaper. The sandpaper has an adhesive coating, a bit like a sticker that adheres to the pad. You can peel the label off the sandpaper, stick it onto the pad using it. The 5 Pad Holes 876691 is the correct pad. Good luck with this repair.
eReplacementParts Team January 16, 2024
Need a new PSA pad. The one I have does not have holes which pad should I order
Larry
for model number 332 t2
asked on 2024-01-05
Hello Larry, Thank you for writing. The Original pad has been discontinued and replaced with Part Number: 876691. We hope this helps!
eReplacementParts Team January 05, 2024
How does the sand paper stay on the replacement pad?
MARK
asked on 2023-04-20
Hi Mark,
Thank you for your question. The abrasive disc should adhere to the pad. According to your owner's manual, position the hook and loop abrasive disc onto sander pad, aligning the dust extraction holes in the paper with the holes on the pad. When using an 8-hole abrasive disc on model 333VS, align the hole pattern in the abrasive with the groove in the sander pad. Press the disc firmly onto the pad. To remove the abrasive disc, peel it from the pad. We hope this helps!
eReplacementParts Team April 20, 2023
Is this replacement pad rubber?
Fred
for model number 334
asked on 2023-03-08
Hello Fred, Thank you for the question. The Pad with 5 holes are made of Rubber. We hope this helps, good luck with the repair!
eReplacementParts Team March 08, 2023
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Foam behind hook and loop pad was compromised
Three screws held old part on. Removed old part and replaced new one. Took less than a minute.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, none
Hook and loop pad disintegrated
Simply needed to remove old pad and replace wit new pad, only 3 screws, refinished a workbench into a kitchen table when repair completed. Would add photo if possible.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, star drive
Pad was worn out
Removed three screws from the old pad and removed it. Tool the three screws and attached the new pad to the sander
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Sander
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The Hook and loop pad wore out.
1. Removed the old pad.
2. Removed the old belt.
3. Installed the new belt around the pad support and the small housing pulley.
4. Attached the new pad.
2. Removed the old belt.
3. Installed the new belt around the pad support and the small housing pulley.
4. Attached the new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Worn sanding pad
Removed old pad, 3 screws.
Installed new pad.
Installed new pad.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The Velcro pad was worn and not holding the sand paper
1. Loosened the 5 screws on the bottom of the sander
2. Removed the old pad
3. Replaced with the new pad and screwed it on
2. Removed the old pad
3. Replaced with the new pad and screwed it on
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Sander base was worn iut
Took old base off. Installed new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, None
Worn out sanding pad
Removed old part and replaced with new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, cord release tool
strain relief broken
remove handle
take wire loose from switch
slide new strain relief on wire.
re-assemble handle
take wire loose from switch
slide new strain relief on wire.
re-assemble handle
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hexhead
Sanding pad separated.
Unscrewed one unit, screwed on the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
76 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
62
4 stars
12
3 stars
2
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Part fit great and service was fast
Fast service and parts was perfect.
Guest -
26 days ago
Verified Purchase
Had the exact part
Needed a replacement velcro pad for my old PC333 orbital sander. Part came quick, price was right and the PC rides again😂
Guest -
September 25, 2023
Verified Purchase
perfect replacement
works like new
Guest -
September 25, 2023
Verified Purchase
Easy install
Part was exact fit, works great
James Stupic -
August 22, 2023
Verified Purchase
Fast service. Just what I needed.
The part fit perfectly. All is good. Thanks
Michael -
August 9, 2023
Verified Purchase
Porte Cable pad
My Porte Cable sander is old and I pulled it out of cabinet and the pad had crumbled I never thought I would be able to get a new one but a quick question on google and your company came up and part fits perfect
Guest -
August 2, 2023
Verified Purchase
Sander
The piece I bought fit perfectly on the sander and it’s up and running again. Thank You. The process of ordering from you is very easy and your inventory is vast with parts that are hard to find which is great thing. The shipping is fast also. Thanks Again Peter
Peter -
July 13, 2023
Verified Purchase
Pad replacement on my sander
It was the exact replacement part and arrived quickly and installed easily. A great service you provide.
Richard -
May 29, 2023
Verified Purchase
the fit was great.
quick shipping
Guest -
May 22, 2023
Verified Purchase
Work great
It fits perfectly and works great received in great condition
Guest -
May 8, 2023
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information