eReplacementParts.com
877-346-4814
Wilton Parts

V-belt 5513030

OEM part for: Wilton, Jet

Part Number: 5513030


Install
Videos!
Grid squares measure 1x1 inch
V-belt - 5513030:WiltonV-belt - 5513030:Wilton
$46.03
In Stock
Ships within 1 business day
Hard More than 2 hours (1 rated repairs)?
OEM: Original Equipment Manufacturer ?
WiltonJet
Does this d-block d-md-none fit my product?

Product Description ?

This is a genuine replacement part that has been sourced from the original manufacturer to be used with belt/disc sanders from Wilton and Jet. The v-belt is used to connect the motor drive pulley and the idler pulley to drive the sanding disc. This item is available as an individual replacement part.

  • Classification: Part
  • Weight: 0.20 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 3 machines

Wilton

4210 (5511717) Belt and Disc Sander View Diagrams & Manuals

Jet

J-4210 (414550) Disc/Belt Sander View Diagrams & Manuals
414550K J-4210k 6 X 48 Belt And 10 Inch Disc View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Sander Parts

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for V-belt


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Hard More than 2 hours (1 rated repairs)?

V-belts needed replacing, sanding belt adjuster tab broken, all pulleys and sanding disc were seized from sitting for years at the same place, table bracket broken.

Bart - June 23, 2016
Tool Type

Sander

Difficulty

Hard

Time

More than 2 hours

Tools Used

Screwdriver, Socket set, Wrench Set, Adjustable Wrench, Drill, tap, hydraulic jack, C-Clamps, disc sander, welder

Used PB Blaster to penetrate seized areas. Drill and tap aluminum sanding disc to pull disc from shaft. Weld tab that was broken on the driven drum support. The hydraulic jack was needed to press the driven drum support and spring to reinstall the assembly. Repaired a broken section on the table bracket that housed a pin with JB Weld.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal