eReplacementParts.com
866-322-9842
Toro Parts
Repair Parts Home  Lawn Equipment Parts  Toro Parts  396568 Valve-Needle

Valve-Needle

Part Number: 396568
Briggs and StrattonToro
Availability: 5 in stock
Price: $13.62
Quantity:
Order within the next 4 hours
and your part ships today!
Product Information
Manufacturer: Briggs and Stratton, Toro
Product Number: 396568
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Toro
Briggs and Stratton

Products Compatibility

This item works with the following types of products:

  • • Engine
  • • Lawn Mower
  • • Lawn Tractor
Questions & Answers

How far is needle supost to be turn out? do I start with all the way in and srew out ?and how many times.uncle though he new it all.thats y I'm writhing this. thanks for your help!
gene maruska for model number 252707 0201-99
Hi Gene, thank you for your question. It is an adjusting screw for the carburetor. Here is a general guideline in carburetor adjustment for a 4 stroke engine. Locate both idle screws on the carburetor, one marked L (low) and one marked H (high). Turn both screws in to shut off fuel then back off 2 turns, next start engine, it may not run great by should start at these settings, next let idle for a few minutes to get it to operating temperature, start by turning the L screw clockwise until the engine starts to slow then turn it in the opposite direction until it once again starts to slow, then bring it to the midpoint of these 2 spots. Using a tachometer to gauge engine speed, set the idle speed screw to bring the engine to 1750 RPM for aluminum-cylinder engine or 1200 RPM for an engine with a cast-iron cylinder sleeve. Next at full throttle turn the high speed or main jet screw clockwise until the engine begins to slow. Then, turn the screw the other way until the engine begins to slow. Turn the screw back to the midpoint. Once adjusted, check the acceleration of the engine by moving the throttle from idle to fast. The engine should accelerate smoothly. If necessary readjust mixture screws. Hope this helps.
Product Information
Manufacturer: Briggs and Stratton, Toro
Product Number: 396568
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy