Watch The
Repair Video

Valve

Part Number: BB0186

Ships within 1 business day

Questions & Answers

Repair Instructions

Product Information

Manufacturer: Senco

Product Number: BB0186

Classification: Part

Weight: 0.03 lbs.

Shipping: Ships Worldwide

Description:

It is a genuine item that is supplied by the original equipment manufacturer for use with Senco nailers. The valve helps to ensure a tight seal inside the cylinder, unfortunately, over time it will wear out and it may begin to fail eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality valve is made of durable materials and is sold individually.

Warning: California's Proposition 65

Frequently Purchased With

Retainer
$7.51

Seal
$8.86

Seal
$8.16

Seal
$4.00

Valve
$22.24

Compatibility

This part is compatible with the following machines:

Senco

FramePro700XL (850004N) Cordless Nailer
FramePro701XP (2H0113N) Air Nailer
FramePro701XP (2H0133N) Framepro 701xp Clipped Head Framing Nailer
FramePro701XP (2H2001N) Air Nailer
FramePro701XP (2H2002N) Air Nailer
FramePro702XP (2K0103N) Framepro 702xp Full Round Head Nailer
FramePro750E (XL782007N) Air Nailer
FramePro750E (XL782008N) Air Nailer
FramePro750XL (860003N) Air Nailer
FramePro750XL (860004N) Air Nailer
FramePro751XP (2J0103N) Framepro 751xp Clipped Head Framing Nailer
FramePro751XP (2J2001N) Air Nailer
FramePro751XP (2J2002N) Air Nailer
FramePro751XP (2J3003N) Air Nailer
FramePro751XP (2J3004N) Air Nailer
FramePro752XP (2F0103N) Framepro 752xp Full Round Head Nailer
SCN60 Air Nailer
SCN60XPFRH (520101N) "scn60 Coil Nailer, Contact Actuation"
SCN60XPFRH (520102N) "scn60 Coil Nailer, Contact Actuation"
SCN63LDXP (8W0001N) Air Nailer
SCN65 Air Nailer
SCN65XPFRH (540101N) 3-1/2 Inch Rugged-Duty Coil Nailer
SCN65XPFRH (540103N) 3-1/2 Inch Rugged-Duty Coil Nailer
SCN65XPFRH (540104N) 3-1/2 Inch Rugged-Duty Coil Nailer

Expand the 48 compatible machines

Products Compatibility

This item works with the following types of products:

• Nailer

Questions & Answers

Sort by

Need to know if this collar Will work for 750xl fraiming pro

Carl for model number 750 xl fraiming pro asked on 2020-03-19

Hi Carl, Thank you for your question. Yes, this valve will work with your nailer. We hope this helps. Thank you and have a great day.

Did this question help you?

Repair Instructions: Submitted by Customers Like You

1 of 1 people found this instruction helpful

Tool Type:

Nailer

Parts Used:

Trigger Assembly - HA0135

Firing System Kit - YK0243

B Kit Lower O-Ring - YK0244

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Pliers, Hex Wrench Set

leaking air from top, not firing.

Using a 5mm hex wrench, remove the four screws from top of the nail gun. Be a little careful, as there is a spring in the assembly that will push the top of the gun off. I used a schematic I printed from the Senco website to identify the broken parts and determine the correct reassembly order. Otherwise, just remove one o-ring or seal at a time and replace with the one from the kit. It seems that this kit is designed for multiple tool models so you will have a few parts left over. The challenge in the reassembly was figuring out that large outer seal on the aluminum chamber had to be installed in the gun body and the tube the installed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 3 people found this instruction helpful

Tool Type:

Nailer

Parts Used:

Valve - BB0186

Seal - BF0203

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Allen wrench

Air was leaking out

Remove the four screws that hold the top cap on. Removed the tow worn pieces and replaced them with the new parts. Clean and oil the inside of the gun. Install the top cap. Test gun. Shoots nails like new again.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Nailer

Parts Used:

Valve - BB0186

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

, Allen wrenches

My simco 752 XP Nailer quit firing

Removed 4 Allen head screws from top of nail gun. Clean wipe down and blow out inside of nailer..Keeping a close eye on the blow-up and parts list simply removed old o rings, 1 valve and piston top end rebuild kit and trigger rebuild kit one at a time and replaced them one at a time this is the safest and easiest way so as not to mix up parts.. and the easiest way to do that is to get a clean blow up of your particular nailer. This helps immensely... Also get some synthetic lube and lightly lube all parts..

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Product Information

Manufacturer: Senco

Product Number: BB0186

Classification: Part

Weight: 0.03 lbs.

Shipping: Ships Worldwide