Product Information
Description:
This is an authentic Coleman-made replacement assembly. It connects from the Fuel Tank (Part Number: 413-5601) to the burners. A generator atomizes the fuel and combines it with air. It features a lever for adjusting the air-fuel mixture as well as a dial to control the flow into the burners. Each valve and generator kit comes pre-assembled. This assembly includes parts that can be found separately: • Valve Stem Packing, Part Number: 118D6201 • Knob Assembly, Part Number: R413-149T • Generator, Part Number: 413A5621 |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Range
Questions & Answers for Valve & Generator Assy.
I got a 413B6601 generator valve and the tip on it is larger can I switch the tips
Mark
for model number 413 stove
asked on 2022-04-02
Hello Mark, thank you for writing. Our research indicates the item features a lever for adjusting the air-fuel mixture as well as a dial to control the flow into the burners. Each valve and generator kit comes pre-assembled. We do not see that switching the tips as an option. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team April 02, 2022
Repair Instructions: Submitted by Customers Like You
6 of 7 people found this instruction helpful
Tool Type:
Heater
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Adjustable Wrench
Coleman model 413E gas camp cook stove was acting up with high yellow flames instead of small blue flames
Pulled clip from fuel tank at the plunger and installed new parts with some oil on the new leather cup. Unscrewed valve and Generator assy. and applied sealer to threads on new assembly, and tightened then screwed on the new cap. Pumped it up and it works like it did new in 1956.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Range
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
The shut off valve would leak.
I unscrewed the old generator and valve and screwed the new one in. Since the fitting is brass there was no need for Teflon tape.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Range
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Pliers
Valve wore out.
Unscrewed the valve assembly and put the new one in. Same with the pump.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Range
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench, None
Fuel generator was leaking fuel, causing excessive fuel to the burner
I used 2 adjustable wrenches to remove the old generator, then attached the new one. There were no problems and no additional instructions were necessary.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Range
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Adjustable Wrench
Shut off valve bad
Removed valve and generator
Put on teflon tape
Installed and tightned
Put on teflon tape
Installed and tightned
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Range
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Generator broke from valve and pump cup was worn out! Hadn't been used in 20 years
Removed old valve from fuel tank, used petroleum resistant thread sealant and installed new valve/generator assembly.
Removed old pump cup and installed new one. Getting the new one inside the pump tube was kind of a pain since the new leather is flat.
TIP! Soak the new cup in cooking oil for a couple of hours!
Removed old pump cup and installed new one. Getting the new one inside the pump tube was kind of a pain since the new leather is flat.
TIP! Soak the new cup in cooking oil for a couple of hours!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Range
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench
Valve and generator assembly quit working after about 40 yrs of usage. Out lived it's life cycle.
Removed the old valve and the generator assembly with an adjustable wrench. Replaced and the job was complete. Less than 15 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
0
3 stars
0
2 stars
0
1 stars
2
< PREV
- 1
Old stove back to life
The new Coleman part arrived quickly, fit perfectly, and brought the old stove back to life! Nice that you can still get a part for a 35 year old stove so easily.
Guest -
June 10, 2021
Verified Purchase
Dual Fuel Stove Tune Up, Tank Valve/Generator
It was the right assemble and perfect fit.
Guest -
October 27, 2020
Verified Purchase
Repairing Family White Gas Stoves
After a YouTube repair review, I recovered the model number, and you had the parts, for both a 1989 and 1960s Coleman White Gas Stoves. And they work great. Thanks.
Guest -
April 10, 2020
Verified Purchase
Sent the wrong part, because it was easer than sending the correct one.
Ordered a very specific part with part number. One of the assembly's had about six or seven part numbers that it would NOT work on so they just sent that on and assumed that it would work. I was the wrong one. They returned my purchase price. But I'm still out $ 12.00 for return shipping and don't have the correct repair part. So do I take a chance on ereplacementparts again ?
Guest -
April 22, 2022
Verified Purchase
eReplacementParts Team
Thank you for your review. I?m sorry to hear that happened, we will be in touch soon to help fix this issue.
Found same part on Coleman company page cheaper but I had already order for you.Wish you would match price.
Part arrived in good condition.
Guest -
October 14, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information