866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Vacuum Parts  Hoover Parts  H-38528040 Vacuum Brush Belt (Style 23)

Vacuum Brush Belt (Style 23)

Part Number: H-38528040
Dirt DevilHoover
Availability: 25+ in stock
Price: $2.99
Quantity:
Order within the next 4 hours
and your part ships today!

*This part replaces obsolete part #: and 38528040.

Description:
Genuine OEM replacement part, this item is sold individually.
The purpose of this belt is to rotate the Brush Roll on the vacuum models shown below. This belt is Style 23.
Depending on the model you have, it can be installed in different ways.
If possible look how the old belt was installed so it will be easier to replace it.
Product Information
Manufacturer: Dirt Devil, Hoover
Product Number: H-38528040
Classification: Part
Weight: 0.15 lbs.
Shipping: Ships Worldwide
Compatibility

This part is compatible with the following machines:

Hoover
Dirt Devil

Products Compatibility

This item works with the following types of products:

  • • Vacuum
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Seal - H-38784016
Fan/Nut Assembly - H-43565006
Vacuum Brush Belt (Style 23) - H-38528040
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Broken fan, warn out belt and old seal
Dismantled the vacuum cleaner to find out what was broken.
Listed parts
Ordered parts
Waited a short time
Unpacked the new parts
Spun the new fan on the motor shaft
Repaired a crack in the fan cover with an industrial adhesive - NOT superglue
Placed the cover back on and screwed in the screws
Replaced the seal
Replaced the belt
Finished reassembling
Plugged it in and had to help the brush to spin until the belt seated be careful not to use fingers when power is on
Vacuumed the living room
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Brush Belt (Style 23) - H-38528040
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Belt broken
My husband and I tried desperately to replace the belt. I thought it was the wrong belt. It was like 2 inches too short. After 1/2 hour, I contacted your customer service and was advised to put the belt in hot water and let it soak, get pliable and it would be easier to install. Thank you for having such intelligent employees. Without the young woman I spoke to, I would have ordered a larger belt. My 40 year old vacuum is like new. I apologize for not remembering the young woman's name. But please tell her she was so patient and represented your company in an outstanding way. Very customer oriented. She is an asset to your organization. Again, Thank you
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Agitator/Brush Roll Assembly - H-48414035
Top Fill Paper Bag-3 Pack - H-4010001A
Vacuum Brush Belt (Style 23) - H-38528040
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver
Would not fluff carpet up or clean
Replaced the agitator/ brush roll assembly
Replaced the belt for the agitator brush
New vacuum bag with proper fitting ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Brush Belt (Style 23) - H-38528040
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Broken belt on upright vacuum
Removed guard, replaced belt
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Brush Roll Assembly - H-93002124
Vacuum Brush Belt (Style 23) - H-38528040
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The upright vacuum cleaner roller froze and the belt got burned and stuck on it.
Removed the old Brush and replaced with new Roller Brush and belt.
Job done.
Unfortunately Hoover Instructions for this Vacuum cleaner had no part number for these items. I had to look at the bottom of the Vacuum cleaner for model number and then find the part number in ereplacementparts.
Thanks,
Tarlock
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Vacuum Brush Belt (Style 23) - ( H-38528040 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy