eReplacementParts.com
877-346-4814
Bissell Parts
Repair Parts Home  Vacuum Parts  Bissell Parts  B-32074 Vacuum Belts
photo thumbnailphoto thumbnail360 degree photo thumbnail
Vacuum Belts

Vacuum Belts

Part Number: B-32074
Bissell
Availability: 25+ in stock
Price: $9.95
Ships within 1 business day

*This part replaces obsolete part #: 203-1093, B-203-1093 and 32074.

Product Information
Manufacturer: Bissell
Product Number: B-32074
Classification: Part
Weight: 0.06 lbs.
Shipping: Ships Worldwide
Description:
Genuine Bissell replacement belts used on Vacuums. This is the Pack of Two (2) belts. Belts tend to stretch over time, so it is recommended to change them at least every 6 months for optimum performance.
Compatibility

This part is compatible with the following machines:

Bissell
Expand the 70 compatible machines
Products Compatibility

This item works with the following types of products:

  • • Vacuum
Questions & Answers

What is the length in inches of these belts?
James Ellis for model number Bissell Mod # 6583
Hello James thanks for writing. Dimensions (L x W ). 5.25 x 0.50 Inches Hope this helps
Length of belt for 8990
Norma for model number 8990
Hello Norma thanks for writing. Dimensions (L x W ). 5.25 x 0.50 Inches Hope this helps
I have upright vacuum pet hair eraser. Model 3920 Wondering if these belts will fit it. It says it does. Thanks
Susan
Hi Susan and thank you for your inquiry. Yes according to the chart these belts will work with your model. Hope this helps.
what part can help if the vacuum suction is failing?
Emma Bowman for model number 6579-3
Hello Emma, thank you for your inquiry! Parts that fix "No suction / low suction": 44% of time Foam Filter Part # B-203-8161 $6.94 23% of time Foam Filter Pleated Circular Filter Part # B-203-1464 $9.19 9% of time Pleated Circular Filter Lever Filter Part # B-203-1215 $3.99 8% of time Lever Filter Vacuum Belts Part # B-32074 $5.06 I hope this information helps!
Do you have a belt for model 1322?
Don cole for model number 1322
Hi Don, Thank you for your question. For your model, the belts are sold in a package of 2. The part number listed under your model number for the package of 2 belts is B-32074. I hope this helps. Thank you and have a great day!
What belt do I need.
Ron for model number 3576-H
Good Day Ron. Thank you for your question in regards to your unit (Model Number 3576-H). Part Numbers B-32074 and BR-1007 are the same belt. The only different is that Part Number B-32074 is for a pack of two belts while Part Number BR-1007 is for an individual belt. You can order these parts either online at our website www.eReplacementParts.com or by calling us by phone at 866-322-9842. Best Regards.
Do you have a vacuum belt for a bissell Power Force helix?
Sonja Lawrence for model number 17004
Hi, sadly I could not find the requested parts, I recommend contacting the manufacturer directly. If they can provide you with a part number you can also check back to see if we stock the part. Thank you for your question and good luck with your repair!
The belts look small for my machine. How big are they can't tell from picture?
Dan Marco for model number 68C71
Hello Dan, thank you for your question. We can confirm that the belt Part Number: B-32074 is correct for your specific unit. The Dimensions are (L x W ). 5.25 x 0.50 Inches Hope this helps!
What crossover belt from great value
tommy for model number 6579-3
Hello Tommy and thank you for writing. Part Number: B-32074 is in the list of compatible items for your model. Hope this helps. Please contact us anytime.
Will this fit the 2259 model number? it is the swivel power lifter.
Lyle for model number 2259
Hi Lyle, Thank you for your question. Yes, these belts will fit your Bissell vacuum. I hope this helps. Thank you and have a great day!
The belt broke, and it says 7/9/10 P/N 3031120,on the belt. It was a very good sweeper, so if I can find some belts that fit maybe it will work again.
vickie for model number 6585
Hello Vickie, thank you for your question. The belt for this unit is Part Number: B-32074 and are sold as a set of two. Good luck with your repair!
My belt says 3031120 will this one fit
Nena
Hello Nena and thanks for writing. We search by model numbers.We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters.We do carry other spare parts for units such as yours, for example, Part Number: B-203-8161Good Luck with your repair.
Belt number is 3031120
James for model number 6594-w
Hello James, thank you for your inquiry! The correct vacuum belts for your model 6594 is part number B-32074. I hope this information helps!
Not sure of what size belt to buy. The old belt # was 3933. We bought the model 32074 as stated on pkg & it is too tight/small. What size belt will fit my vacuum cleaner?
Linda for model number Bissell Vacuum Model #6591
Hello Linda and thank you for writing. This part is discontinued for your model and is no longer available. We have no known replacement information in our system. We recommend you contact the manufacturer of the part to see if they have recently released a new substitute. We do carry related parts for units just like yours. For example, part number B-203-6735. Good luck with your repair.
Repair Instructions: Submitted by Customers Like You
11 of 13 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Vacuum drive belt needed replacement.
1. Removed 2 screws from the bottom plate.
2. Lifted off bottom plate and remove beater bar and old drive belt.
3. Cleaned all threads etc from beater bar.
4. Reassembled in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
9 of 11 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, none
Worn out belt
I removed the access plate, then removed the belt from the motor spindle, then removed the brushroll. I then put the new belt around the brush roll set it in place and stretched the belt around the motor spindle. and then replaced the access plate.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Crevice Tool - B-203-1063
Vacuum Belts - B-32074
Brushroll Assy - B-203-2448
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushroll stopped turning, belt started to smoke.
1. Unscrewed 4 phillips head screws from belt cover.
2. Took off belt.
3. Slipped out roller.
4. Put new belt around roller, other end of belt on drive shaft.
5. Slid roller into grooves.
6. Replaced belt cover, installed screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Vacuum-belt broke.
Unscrewed the cover plate, pulled out the beater brush, wrapped the belt around the small turn post and then on to the beater brush. Slid the beater brush back into place and screwed the cover plate back on to finish.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Brush Roll - B-203-1289
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belt was worn out and roller no longer turned (hair embedded in outer bearings)
Unscrewed roller cover, removed old roller and belt, the new ones go right back in the same way, screwed cover back on, washed the filters since I had the time, when dry put them back in
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
15" Brush Assembly - B-203-1283
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Roller bar wouldn't turn
New roller and belt. Very easy to repair and the vacuum is working great now!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belts were getting too loose.
Just replaced the old belt with a new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Belt had broken
I had to dismantle the base to install the new belt. About ten screws
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Vacuum Belts - B-32074
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Belt was stretched wouldn't pick up.
Unscrewed the screws, replaced the belt put screws back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Handle Release Pedal - B-203-0052
Vacuum Belts - B-32074
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, air compressor
release pedal broke
Belts were easy, unlatch the roller cover and pull the roller out install the new belt, I used a air compressor to blow out the vacuum the release pedal wasn't hard just a pain. Youtube shows prying the holders apart with 2 screw drivers not so on this one. I had to pry each side holder out and press the old one out one side at a time. Then to reinstall you push the new one into place from the top side.
But it is all plastic so I was very careful it did snap into place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
4 Reviews
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • needed a vacuum belt
    easy to order, came 1 day before promised. Glad you were there to provide me what I needed!
    Guest - October 14, 2019 Verified Purchase
    As good a quality as any I've bought
    These are the same or even better than OEM. I hope to buy from you often as I need parts.
    Guest - July 23, 2019 Verified Purchase
    Perfect match,
    The parts i got fit exact. I'm happy with the prompt service I received from you! Now my vacume cleaner REALLY SUCKS literally! Thanks. J.C.
    Guest - May 27, 2019 Verified Purchase
    Everything was delivered as promised and works great.
    The woman I dealt was very professional and helpful.
    Guest - May 3, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Bissell
    Product Number: B-32074
    Classification: Part
    Weight: 0.06 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy