Tube-Breather

Removed engine hood/cover, then placed it aside
- Took the fan cover off using a nut driver, then using the same nut driver removed the shrouds around the upper engine.
- Once both above items were removed I could see the breather tube, with pliers I gently managed to pull off the breather tube.
- After removing the old breather tube I managed to replace the new breather tube;
- Once the items were replaced I started the engine, it ran for about a minute then died. Looking at the valve cover breather tube it too was cracked. Much more difficult to replace this hose, using a nutdriver tool I removed the valve cover, to loosen removing and replacing the value cover tube.