Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Blower
Questions & Answers
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The Elbow tube broke after more than 15 years of use
Down load parts list and diagram from internet for the PB260L back pack Blower
1. Remove flexible blower tube from Elbow tube by loosening the clamp.
2. Remove the screw holding the Elbow tube to the blower body.
3. Remove the Elbow tube from the from the blower rotating C Clockwise about 30 degrees.
4. Attach the new Elbow tube to the blower body and rotate Clockwise until screw holes align.
5. Insert and tighten screw
6. Slide Flexible Tube onto elbow tube and tighten clamp screw.
Sounds involved but it's simple
1. Remove flexible blower tube from Elbow tube by loosening the clamp.
2. Remove the screw holding the Elbow tube to the blower body.
3. Remove the Elbow tube from the from the blower rotating C Clockwise about 30 degrees.
4. Attach the new Elbow tube to the blower body and rotate Clockwise until screw holes align.
5. Insert and tighten screw
6. Slide Flexible Tube onto elbow tube and tighten clamp screw.
Sounds involved but it's simple
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
My tube was split
Just take off the clamp and remove the old tube and replace it with the new one, easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
The elbow tube was split were it meets the corrugated rubber hose
Was easy fix unscrew clamps holding the elbow and hose disconnect the old elbow from the blower and hose. Reconnect the new part. Used a bolt, washer, and nut to grip the handle because those items were missing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Tube-Blower-Elbow - ( E160000041 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Blower repair
Part arrived timely. Easy to find correct part on web site. Only five minutes to replace.
Guest -
11 days ago
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
