Throttle Valve KF125190

Repair Difficulty:

Medium

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Would not shut off

Removed the throttle valve plug and spring
Removed the old throttle valve
Installed the new throttle valve
Installed the spring and the plug

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Pin - KF134169

Plug-throttle Valve - KF134162

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

No throttle control

Inserted throttle pin, throttle valve and spring, and plug. Tighten throttle plug with screwdriver. Plugged ratchet to air hose and throttle is working fine. No air leaks. Very simple and easy repair. Would use again if more repairs are needed.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Throttle valve, which is plastic finally broke after 25 years

Removed throttle valve plug with a screwdriver and removed spring and defective valve - replaced parts in reverse order.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Plug-throttle Valve - KF134162

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

No power and air leakage in air ratched wrench

1. Removed black plastic screw cap from body of wrench.
2. Removed old spring and plastic valve.
3. Cleaned valve seat.
4. Removed o-ring from plastic screw and replaced with new o-ring.
5. Put new valve, spring and cap screw in body
6. Test to confirm.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Tune-up Kit (model E) - CA155086

Stem-valve - KF124391

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Adjustable Wrench, Small file

Air paddles were bad and throttle valve was missing.

Disassemble ratchet clean and file parts so they reassemble easily WD 40 parts and apply air.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Air ratchet would run as soon as air line was connected

Remove screw in handle. Remove spring and throttle shaft. Replace throttle valve. Replace spring and throttle valve. Replace screw. Your done. Works great now.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

The trigger spring and valve were broke.

Took the old spring and valve body out and replaced it with new and a new "O" ring also.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Air ratchet

Parts were missing- Installed missing parts

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used:

Plug-throttle Valve - KF134162

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Air valve sticking

Removed old parts and installed new ones

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Ratchet Wrench

Parts Used: