Easy
15-30 minutes
This is a manufacturer sourced replacement part designed for use with Bunn tea/coffee brewers. This is one of the seals for the tank. Over time it will shrink, become brittle and crack allowing for leaks. At that time it should be replaced. It is made out of silicone and it is sold individually.
Replacing this item you would need screwdriver.
Gasket, Tank Inlet- Silicone 01201.0000
OEM part for: BUNN
Part Number: 01201.0000
$4.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 35 machines
BUNN
FMD-1 (S.N. FMD0013000 and After) Fresh Mix Dispenser View Diagrams & Manuals
FMD-2 (S.N. FMD0013000 and After) Fresh Mix Dispenser View Diagrams & Manuals
H5 Element Hot Water Equipment View Diagrams & Manuals
H5M Hot Water Equipment View Diagrams & Manuals
OHW Hot Water Equipment View Diagrams & Manuals
SRU Coffee Brewer View Diagrams & Manuals
U3A (S.N. U300004095 and After) Coffee Brewer View Diagrams & Manuals
TB3Q (S.N. TU00020000 and Before) Iced Tea Brewer View Diagrams & Manuals
TB3Q (S.N. TU00020000 and After) Iced Tea Brewer View Diagrams & Manuals
A10 Coffee Brewer With Warmer View Diagrams & Manuals
A10A Coffee Brewer With Warmer View Diagrams & Manuals
CRT5 Coffee Brewer with Warmer View Diagrams & Manuals
CRTF5 Coffee Brewer with Warmer View Diagrams & Manuals
C (Series) Automatic Coffee Brewer With Warmers View Diagrams & Manuals
CT (Series) Automatic Coffee Brewer With Warmers View Diagrams & Manuals
CWTF (Series) Automatic Coffee Brewer With Warmers View Diagrams & Manuals
CW (Series) Automatic Coffee Brewer With Warmers View Diagrams & Manuals
H5E Hot Water Equipment View Diagrams & Manuals
H5X Hot Water Equipment View Diagrams & Manuals
OHWA Hot Water Equipment View Diagrams & Manuals
TB3Q-LP (S.N. TU00020000 and After) Iced Tea Brewer View Diagrams & Manuals
TB3Q-LP (S.N. TU00020000 and Before) Iced Tea Brewer View Diagrams & Manuals
TU3Q-EZ Iced Tea Brewer View Diagrams & Manuals
TU3Q Iced Tea Brewer View Diagrams & Manuals
U3 (Series) Coffee Brewer View Diagrams & Manuals
VLPF Coffee Brewer With Warmer View Diagrams & Manuals
VP17 (Series) Coffee Brewer With Warmer View Diagrams & Manuals
VPR (29999.0000-39065.0000) Coffee Brewer With Warmer View Diagrams & Manuals
VPR-APS (29999.0000-39065.0000) Coffee Brewer With Warmer View Diagrams & Manuals
VPR-TC (29999.0000-39065.0000) Coffee Brewer With Warmer View Diagrams & Manuals
VPR (S.N. VPR0270000 and Before) Coffee Brewer With Warmer View Diagrams & Manuals
VPS (Without Lighted Switch) Coffee Brewer With Warmer View Diagrams & Manuals
VPS (With Lighted Switch) Coffee Brewer With Warmer View Diagrams & Manuals
SRUA (Series) Coffee Brewer View Diagrams & Manuals
VP17-2 Pourover Coffee Brewer with Warmer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Coffee Maker Parts
- Tea Maker Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
1
1 stars
0
< PREV
- 1
Easy repair
Was just as ordered and arrived in a timely fashion
Guest -
February 27, 2023
Verified Purchase
Easy fix
Easy fix. came in good condition
Thanks
Guest -
November 14, 2019
Verified Purchase
Parts fit good
You guys are the best. What is great about your company is that I can look at the diagrams myself to make sure I have the right part. I am tired of dealing with the idiots at the parts counter who do have a clue about anything and couldn't find it if they did. THANK YOU!
Guest -
August 21, 2019
Verified Purchase
worked great
quick shipping
Guest -
July 1, 2019
Verified Purchase
Easy repair
Gasket works and fits perfectly...
Mark -
June 26, 2019
Verified Purchase
shopping experience
Ereplacementparts did a great job of accepting and processing my order and getting it shipped out right away. I received my replacement part in a few days.
Thanks Ereplacement
Bill
Guest -
May 24, 2019
Verified Purchase
Great parts... horrible customer service!
Paid for and was charged for expedited shipping. One item was "special order" so the entire lot was detained. Two day shipping became three weeks. Was told half of the shipping cost would be credited... still waiting.
Guest -
September 3, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Gasket, Tank Inlet- Silicone
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Reason for repair, coffee pot leaked when pouring water in the top to make coffee.
michael - May 28, 2016
👍 9 of 9 people found this instruction helpful
Tool Type
Tea Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set
Take off top with screw driver unscrew part where water funnel through and old repalce gaskets, reverse order and put back together very simple and quick no more leak .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Top Tank Seal Leaking
Steve - February 15, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
***UNPLUG COFFEE MAKER***
Remove (qty-2) Phillips screws in Top LID (reservoir cover)
Remove (qty-4) Phillips screws under top (reservoir)
Remove (qty-6) hex nut screws from Tank Top
Remove Diffuser Head
Remove 1/2" nut and washer.(on diffuser tube)
Carefully Lift tank lid with internal components still attached
Remove OLD tank gasket seal and Replace with new tank gasket seal
Re-assemble and check for leaks..(MAY NEED TO ADD Tank Inlet Gasket) to ensure seal.
Remove (qty-2) Phillips screws in Top LID (reservoir cover)
Remove (qty-4) Phillips screws under top (reservoir)
Remove (qty-6) hex nut screws from Tank Top
Remove Diffuser Head
Remove 1/2" nut and washer.(on diffuser tube)
Carefully Lift tank lid with internal components still attached
Remove OLD tank gasket seal and Replace with new tank gasket seal
Re-assemble and check for leaks..(MAY NEED TO ADD Tank Inlet Gasket) to ensure seal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Thermal fuse
Bobby - December 26, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Coffee Maker
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Nutdriver
1. Removed top and water pan.
2. Tested for reason it would not heat.
3. Determined it was thermal fuse.
4. Took tank heating element out and cleaned.
5. Ordered parts.
6. Received parts and reassembled.
7. Works great.
8. New coffee maker 600 dollars fixed for under 30.
2. Tested for reason it would not heat.
3. Determined it was thermal fuse.
4. Took tank heating element out and cleaned.
5. Ordered parts.
6. Received parts and reassembled.
7. Works great.
8. New coffee maker 600 dollars fixed for under 30.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
leaking and not heating well
Morris - December 23, 2022
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Adjustable Wrench
replaced tank inlet gasket and thermostat. Easy replacement
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leak when filling
KEN - May 18, 2020
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver
Unscrewed lid
Note tiny clip are loose on lip
Pulled out water tank with 7/8 socket
Pulled out old seal and replaced
Pulled out thermostat and cut off old grommet
Slid new grommet on and pushed back in
Screwed top back on mindful of little clips
Note tiny clip are loose on lip
Pulled out water tank with 7/8 socket
Pulled out old seal and replaced
Pulled out thermostat and cut off old grommet
Slid new grommet on and pushed back in
Screwed top back on mindful of little clips
Did you find this story helpful?
Thanks for voting and helping fellow customers!
tank inlet gasket had cracked with age and was allowing water poured in for making coffee to leak into the rest of the coffee maker and come out from under the coffee maker.
Nicklas - October 3, 2019
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed the one screw holding the cover of the coffee maker in place.
2. Removed the cover of the coffee maker
3. Removed water tray holder screw
3. Removed the water tray
4. Removed the old gasket and put new gasket in place
5. Put water tray back in coffee maker and installed holder screw
6. Put cover in place and secured with screw
7. Plugged coffee maker in, added water and made coffee (no leaks now)
No special tools necessary and took less than 15 minutes to repair.
2. Removed the cover of the coffee maker
3. Removed water tray holder screw
3. Removed the water tray
4. Removed the old gasket and put new gasket in place
5. Put water tray back in coffee maker and installed holder screw
6. Put cover in place and secured with screw
7. Plugged coffee maker in, added water and made coffee (no leaks now)
No special tools necessary and took less than 15 minutes to repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Leak
George - February 12, 2019
Tool Type
Coffee Maker
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Unbolted the water catch tray from the top of the tank. Replaced washer and replaced the tray.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
leaking
ESTA - February 6, 2019
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
took pot apart and replaced washer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
tank inlet gasket & thermostat replacement
James - December 28, 2018
Tool Type
Coffee Maker
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Remove old parts and inserted new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old thermostat was failed open
Wayne - December 5, 2018
Tool Type
Coffee Maker
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set
1. Unplug coffee maker from power source.
2. Remove front cover.
3. Remove top cover, unplug warmer connectiion and set top aside.
4. Remove tank inlet tray to provide access to top of water tank.
5. Pull thermostat bulb and silicone seal from the top of the water tank.
6. Behind front cover, disconnect two electrical leads from the thermostat.
7. Remove two mounting screws from thermostat mounting bracket.
8. Guide old thermostat bulb through case and remove old thermostat.
9. Feed new thermostat bulb through case and submerse into the water tank, put silicone seal in place.
10. Mount new thermostat and secure screws.
11. Reconnect electrical leads to the thermostat.
12. Replace tank inlet gasket and reinstall the tank inlet tray.
13. Reconnect the top warmer connections and reinstall top,
14. Replace front cover.
15. Plug it in and try it out. (I did the try it out before I put it all back together just in case there was another problem. I was also able to see there was no leak between the inlet tray and the tank.)
2. Remove front cover.
3. Remove top cover, unplug warmer connectiion and set top aside.
4. Remove tank inlet tray to provide access to top of water tank.
5. Pull thermostat bulb and silicone seal from the top of the water tank.
6. Behind front cover, disconnect two electrical leads from the thermostat.
7. Remove two mounting screws from thermostat mounting bracket.
8. Guide old thermostat bulb through case and remove old thermostat.
9. Feed new thermostat bulb through case and submerse into the water tank, put silicone seal in place.
10. Mount new thermostat and secure screws.
11. Reconnect electrical leads to the thermostat.
12. Replace tank inlet gasket and reinstall the tank inlet tray.
13. Reconnect the top warmer connections and reinstall top,
14. Replace front cover.
15. Plug it in and try it out. (I did the try it out before I put it all back together just in case there was another problem. I was also able to see there was no leak between the inlet tray and the tank.)
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
