Product Information
Description:
This genuine replacement part is specially designed for use with Bosch demolition hammers. It is supplied directly from original equipment manufacturer. This switch pawl/lever is secured to the mounting plate with a metal pin. Please note this item only includes one (1) plastic trigger, other parts are sold separately. To complete this repair job you will need a set of screwdrivers and pliers. • Make sure to unplug equipment • Remove screws from the handle • Remove handle/cover • Remove pin that holds switch-pawl to the plate • Secure new one using a pin • Reassemble and test the hammer |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 17 compatible machines
Products Compatibility
This item works with the following types of products:
- • Demolition Hammer
- • Drill
- • Hammer Drill
Questions & Answers for Switch-pawl
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Demolition Hammer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Standard L-end wrenches
I've had my demo hammer over 25 years, plus workers who often don't take care of tools properly after and during use. Dropped at different times & broke parts off
Placed on shop table & removed old broken parts one at a time & replaced with new using same bolts. Self example to follow or see on video
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Demolition Hammer
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Hammer fell over and smashed the handle on the ground breaking it
I used an allen wrench to remove the handle retaining screws then pushed out the pin for the paw , installed the new paw then put the handle back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information