This is a genuine OEM supplied replacement switch that is utilized on Makita trimmers. It is the main component that allows a user to turn the tool on and off. Over time due to mechanical or electrical issues the switch may begin to fail eventually requiring replacement for the tool to function as intended by the original manufacturer. Please note this durable plastic body item is sold individually.
Switch 651472-8
OEM part for: Makita
Part Number: 651472-8
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 2 machines
Makita
This item works with the following types of products:
- Trimmer Parts
- Laminate Trimmer Parts
This part replaces obsolete part #: 651457-4
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The switch broke and the cord was frayed.
Tool Type
Router
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Soldering iron, heat shrink tubing.
Parts Used
2. Pulled apart the housing.
3. Removed carbon brush blocks.
4. Removed switch and disconnected wires. Documenting where the four wires are attached.
5. Cleaned stator, rotor, inside of housing. Cleaned and lubricated bearings.
6. Replaced switch, installed new one, cut the two existing power wires on the old switch.
7. Left old switch connectors intact with 1 1/2" of existing black and white wires.
8. Soldered new B&W wires to short sections of old wire with connectors, use heat shrink tubing.
9. Used old strain relief and cord clamp to install new cord.
10. Reassembled router housing, reinstalled carbon brush blocks.
Knocked router off my workbench and broke the on/off toggle switch.
Tool Type
Laminate Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Switch broke
Tool Type
Laminate Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Deadblow Hammer
Parts Used
Separate Housing with dead-blow hammer
Remover Switch
Install new switch
Re-install in reverse
Bad power cord and broken switsh
Tool Type
Router
Difficulty
Hard
Time
1-2 hours
Tools Used
Screwdriver, Pliers, rubber hammer- stripper- crimper- neddle nose pliers
Parts Used
2. Remove brushes
3. Tap and pry top of tool apart with caution and leave bottom together.
4. Remove bolts from stator and unhook brush connectors (2) and leave rotor in bottom half.
5. Switch and cord connections are not exposed. Unscrew switch and remove wires. Note handing for re connections.
6. Put tool back together and lightly tap with a rubber hammer to put housings back together.
7. Caution- not a snap to fix. Take to took to a shop unless your real good with your hands.
Broken switch
Tool Type
Laminate Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2. Removed the brushes and motor.
3. Replaced the switch.
4. Reassembled unit.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.