Easy
15-30 minutes
This is a genuine OEM sourced replacement part used on Jet power equipment. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. This switch has a plastic body and it is sold individually.
To replace this switch you would need a Screwdriver.
• First make sure the tools is not plugged in
• Then you want to remove screws used to secure the switch
• Disconnect wires from the old switch and remove
• Secure the new switch and connect wires to it
Switch 994542
OEM part for: Jet
Part Number: 994542
$66.83
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.45 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 27 machines
Jet
JDP-17MF (354169) 17 in. Drill Press View Diagrams & Manuals
JDP-20MF (354170) Drill Press View Diagrams & Manuals
JJ-6CSX (708457K) Woodworking Jointer View Diagrams & Manuals
JJ-6CSDX (708457DXK) Woodworking Jointer View Diagrams & Manuals
DC-1100A (708639) Dust Collector View Diagrams & Manuals
DC-1100RC (708626RC) Dust Collector View Diagrams & Manuals
DC-1200A (708634) Dust Collector With Filter Bag View Diagrams & Manuals
DC-1200CRC (708635RC) Dust Collector With Canister View Diagrams & Manuals
DC-1200C (708634C) Dust Collector With Canister View Diagrams & Manuals
DC-1200A (708635) Dust Collector With Filter Bag View Diagrams & Manuals
JWBS-14DXPRO Delux Pro Band Saw View Diagrams & Manuals
DC-1100BK Dust Collector View Diagrams & Manuals
DC-1100CK Dust Collector View Diagrams & Manuals
DC-1100MK Dust Collector View Diagrams & Manuals
DC-1100VX Series Dust Collector View Diagrams & Manuals
DC-100VX-BK (708657K) Dust Collector View Diagrams & Manuals
DC-1200 Series Dust Collector View Diagrams & Manuals
DC-1200VX Series Dust Collector View Diagrams & Manuals
JDP-12 (707300) 12" Variable Speed Drill Press View Diagrams & Manuals
JWBS-14CS (708115K) 14-inch Woodworking Band Saw View Diagrams & Manuals
JWBS-16B (708749B) 16-inch Woodworking Band Saw View Diagrams & Manuals
JWTS-10JF (708301) Table Saw View Diagrams & Manuals
DC-1900C Dust Collector View Diagrams & Manuals
JDP-14MF Drill Press View Diagrams & Manuals
JSL-12BS 12-Inch Bandsaw View Diagrams & Manuals
JWBS-18 708750 Woodworking Bandsaw View Diagrams & Manuals
JWCS-10A Cabinet Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Drill Parts
- Drill Press Parts
- Jointer Parts
- Band Saw Parts
- Saw Parts
- Table Saw Parts
Repair Videos ?
Watch the Repair Video for
Switch
Articles:
|
Step-by-step instructions for removing and installing the switch on your Jet dust collector....
December 05, 2017
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Power tool switch
Exactly what I wanted-
Gary -
November 16, 2023
Verified Purchase
Actual same day shipping.
Most companies sat same day shipping, but what they do is create a shipping label and call that as shipped. The part may not actually leave the vendor for 1 to 3 days. eReplacementParts actually shipped the part the dame day they received my order. Great service. The part was an exact replacement for a 26 year old Jet contractors table saw. I was back working in ten minutes it took to install the switch.
Paul -
August 3, 2023
Verified Purchase
Right part and right price!!
great service- had the part I needed and delivered pretty quickly- Thanks so much!!
Was exactly what I needed to get going again !!
Guest -
November 3, 2022
Verified Purchase
Great customer service. Very pleasant and helpful.
Your video made a (what I expected ) difficult job easy. Thank you.
Guest -
February 21, 2022
Verified Purchase
Great part, worked great
Arrived quickly, exact fit. My drill press works perfect.
Anonymous -
October 21, 2021
Verified Purchase
Great service, found the part that I needed easily.
I received the part sooner than expected. Installation was a snap!
Guest -
June 6, 2021
Verified Purchase
Exact replacement
Exactly what I needed
Kenneth -
April 7, 2020
Verified Purchase
Switch
It fit good and worked
Guest -
November 6, 2019
Verified Purchase
Switch replacement
Just had to use and exterior junction box and extend the wires to make it work. Product works fine and the deliver times prompt
Guest -
March 9, 2022
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
Will this switch work with a 20"jet wood planner with 3HP 220v (JWP-208-1)
Craig
asked on 2023-03-28
Hello Craig, thank you for your question. No, the part chosen is not compatible with the model given. We hope this information will help you.
eReplacementParts Team March 28, 2023
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bad switch
Richard - September 22, 2017
👍 5 of 7 people found this instruction helpful
Tool Type
Jointer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Channel locks, med size
Parts Used
Previous owner of my JET JJ-6CSXW jointer sold it because it did not cut effectively and the switch was hard to turn on and off. He had also converted it to 220 volts. He had used it without using a dust collector. After cleaning all the sawdust out of it, and servicing it, I took the switch apart and found the switch and the electrical box were also full of sawdust. I wasn't happy with the way the newly cleaned switch worked, so I ordered a new switch and an electrical cord. I also converted it back to 115 volt. I wasn't sure how to remove the strain relief bushings, but a local tool shop showed me how to remove them by squeezing them with a pair of channel locks and wiggling the bushing. No channel locks are required to pop them back in once the switch put together. Not an easy repair, but it sure saved me a ton of cash fixing up a "poorly working" jointer. Works great now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch broken.
Mark - April 22, 2018
👍 2 of 3 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
The switch was wired incorrectly from the factory. Installed the new switch correctly. Works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
no power through switch
Kurt - April 17, 2024
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
replaced switch and worked just like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old switch quit working - old
James - November 3, 2022
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Attached table saw wires to new switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
wire was frayed and shorted out
Daniel - October 14, 2020
Tool Type
Jointer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
loosened 2 screws to remove old switch, pulled out old switch. removed wires, taped wires, installed new switch. cleaned up
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Saw would not start.
Frederick - September 25, 2020
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Nutdriver
Parts Used
replaced start/stop switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The original switch (20+ yo) failed
Richard - June 21, 2018
Tool Type
Table Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Removed old switch and replaced with new one. Only potential confusion is that it is easy to wire it and have the switch upside down. Saw starts eagerly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Exact match with original switch
Dan - April 30, 2018
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed 2 face screws and loosened 2 hot, 2 neutral and 1 ground and put back in the same fashion. Very easy for a non electrical woodworker
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I bought a used drill press and the on & off buttons where slightly melted and cover around them. Table crank boken, and needed proper key.
RONALD - February 14, 2017
Tool Type
Drill Press
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Hex head.
1. Unplugged drill press.
2. Removed on and off push buttons cover.
3. Unscrewed switch.
4. Removed switch wires.
5. Unscrewed and removed outer cover.
6. Installed new outer cover 3 screws.
7. Installed wires onto new on & off switch.
8. Put on & off switch cover over switch and aligned two screws.
9. Replaced table handle, plugged in and tested.
2. Removed on and off push buttons cover.
3. Unscrewed switch.
4. Removed switch wires.
5. Unscrewed and removed outer cover.
6. Installed new outer cover 3 screws.
7. Installed wires onto new on & off switch.
8. Put on & off switch cover over switch and aligned two screws.
9. Replaced table handle, plugged in and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Start switch went bad.
william - February 13, 2017
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Made sure the tool was unplugged first!
2. Disassembled the housing.
3. Disconnected and removed the old switch.
4. Installed the new switch reversing the procedure.
Easy peasy!
2. Disassembled the housing.
3. Disconnected and removed the old switch.
4. Installed the new switch reversing the procedure.
Easy peasy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
