Switch DY-91898902
Part Number: DY-91898902
Order within the next 6 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 918989-02.
Product Information
Description:
| This part is an OEM from the Dyson manufacturer. The metal and plastic switch is made for use with several upright vacuums. This item is fastened inside the switch cover assembly, allowing the operator to (de)activate the engine. The switch is sold individually, and a screwdriver is needed for the installation. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Vacuum
Questions & Answers for Switch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, DeWalt Torq T15 bit
Power switch broke; vacuum wouldn't run.
Dyson DC41 Animal 1. Followed video, https://www.youtube.com/watch?v=4R0gs3vC-cU, but replaced power switch Part Number: DY-91898902, not the brush switch as in the video. The switch is the same. This switch can't be bought from the Dyson company as it's not a user replacement according to an agent I talked to. On investigation, I found screwdriver bit DeWalt Torq T15 bit was necessary to remove 2 screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Torques
Thought the switch was bad. But it wasn’t the switch. I now believe the motor might be going out
Replaced the switch, which was really easy. It was located in the handle. Just a couple Tourte screws and unplug the wires
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
beater bar did not work
removed the switch cover. unplugged the switch and plugged the replacement switch and reinstalled the switch cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Defective switch
Removed 4 screws to remove cover to expose switches.
Pulled 2 wires from defective switch
Put wires onto new switch
Replaced cover and screws
Very easy
Pulled 2 wires from defective switch
Put wires onto new switch
Replaced cover and screws
Very easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, torx driver
clutch was slipping for beater bar and switch was intermittant
there was prying involved to fit the new belts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The switch to shut the rotating brush no longer worked.
Removed the four screws holding the switch housing in place. Pulled the connections off the old switch, put the connections on the new switch and reassembled the switch housing.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Vacuum
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Power switch went bad
Googled how to replace switch followed the instructions EASY REPAIR I
also replaced brush switch at the same time,
also replaced brush switch at the same time,
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair with correct part
The Dyson vacuum cleaner switches that I received easily and quickly fixed the original equipment failure.
Guest -
June 20, 2023
Verified Purchase
worked as expected
Received this switch for my Dyson vacuum. Watched a YouTube video on how to install it. Very easy & now it works great. This is the second part I ordered from this company & no issues whatsoever. A lot cheaper than replacing the vacuum or taking it to a repair shop.
Guest -
April 16, 2023
Verified Purchase
Dyson DC41 vacuum power switch
I needed to replace the power switch on our Dyson DC41 vacuum which fails yearly. I received the part quickly. There are no real changes in the design or function to the switch so it is the same wimpy plastic switch. I know the failure rate of this switch so I ordered 2 so I have a spare in the future.
Guest -
July 16, 2019
Verified Purchase
easy repair
the only problem i had was the new switch was i had to make an adjustment on the vacuum it kept on shutting off
Guest -
August 5, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
