eReplacementParts.com
866-322-9842
Fein Parts
Repair Parts Home  Power Tool Parts  Fein Parts  30701060000 Switch

Switch

Part Number: 30701060000
Fein
Availability: 13 in stock
Price: $18.70
Quantity:
Order within the next 6 hours
and your part ships today!
Product Information
Manufacturer: Fein
Product Number: 30701060000
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Description:
This switch is a high quality item that is specially produced for Fein power tools. It is the part of the unit that allows user to turn the equipment on and off. Mechanical switches over time will wear out and fail eventually requiring replacement. Please note, this plastic switch is sold individually. You will need a screwdriver to replace this switch.
Products Compatibility

This item works with the following types of products:

  • • Grinder
  • • Nibbler
  • • Sander
  • • Shear
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Oscillating Tool
Parts Used:
Switch - 30701060000
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Electrical switch intermittent turn-on & turn-off
Fein MSXE-636 tool - electrical switch replacement: Remove the cover over the electrical switch containing the speed selector dial on the rear of the tool by removing 3 screws, and let dangle by the speed selector module wiring. Remove the tool power cord retaining bar held with 2 screws. Unscrew the 4 screws on the electrical switch that retain the input wiring (x2) and the tool motor wiring (x2). Remove the electrical switch. Install new electrical switch and wiggle to seat in the tool body slot and engage the actuator bar linked to the power switch slide bar on the top of the tool. Check that the power switch slide & link bar actuates the electrical switch correctly. Route input and tool motor wires (x4) into the appropriate electrical switch sockets and install wire retaining screws (x4). Align the strain relief on the power cord into the tool body and reinstall the cord retainer bar with 2 screws. Reinstall the rear tool cover by aligning the speed selector module with the guide/ retainer slots in the tool body, aligning the wiring coils into the spaces within the tool body, and pressing the tool cover to the tool body - reinstall the 3 retaining screws. Test then DONE
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Switch - 30701060000
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The sander was intermittent. It would stop every now and then. It would always start back up by just turning the switch back on.
Replace the defective power switch. I also found a loose wire on the old switch which may have been the whole problem.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Oscillating Tool
Parts Used:
Carbon Brush - 30711129009
Switch - 30701060000
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Tool would not turn on.
I opened the case, 4 Phillips screws
Removed and installed new switch, small Phillips screw driver.
Installed new brushes..
Closed case
Did not use the brush holders, put in spare parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Oscillating Tool
Parts Used:
Switch - 30701060000
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The switch was broken.
Opened up the case, disconnected the old switch, installed the new switch and closed the case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Parts Used:
Switch - 30701060000
Interf. Capacitor - 30722037004
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
The switch was broken so the sander would not turn on
The sander was already apart so the old switch was taken out and the new one put in then the sander went back together.
Your diagrams of the tools make it so easy to find the parts I need and so easy to order, I have always gotten the correct parts at a good price in a timely manner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Oscillating Tool
Parts Used:
Switch - 30701060000
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
Switch not working
Remove the bottom cover
Make a wiring diagram
Remove the wires from the old switch
Install the wires to the new switch
Replace the bottom cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Manufacturer: Fein
Product Number: 30701060000
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Switch on a Fein Sander
Step-by-step instructions for removing and installing the switch on your Fein sander....
July 30, 2018
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy