eReplacementParts.com
877-346-4814
Ridgid Parts
Repair Parts Home  Power Tool Parts  Ridgid Parts  760472008 Switch

Switch 760472008

OEM part for: Ridgid, Ryobi

Part Number: 760472008


Install
Videos!
Grid squares measure 1x1 inch
$11.95
Usually ships in 7 - 12 business days
Leaves our warehouse within
7 - 12 business days
Medium 15-30 minutes (1 rated repairs)?
OEM: Original Equipment Manufacturer ?
RidgidRyobi
Does this d-block d-md-none fit my product?

Product Description ?

The switch is made out of plastic. This genuine item is supplied by the original equipment manufacturer for use with Ridgid and Ryobi drills. It is available individually. During replacement, it may require a screwdriver to help install this part correctly. It may become broken and will need to be replaced.

  • Classification: Part
  • Weight: 0.03 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 3 machines

Ridgid

R7000 3/8" Electric Drill View Diagrams & Manuals
R7001 3/8 In Professional Electric Drill View Diagrams & Manuals

Ryobi

DG100 Electric Screwdriver View Diagrams & Manuals
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Drill Parts
  • Electric Drill Parts
  • Screwdriver Parts

This part replaces obsolete part #: 760339001

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Switch


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Medium 15-30 minutes (1 rated repairs)?

The control switch was stuck at full speed.

Alvin - December 11, 2019
Tool Type

Electric Drill

Difficulty

Medium

Time

15-30 minutes

Tools Used

Screwdriver, Pliers, Wire cutter

1. Take cover off of drill using a torx T10H tool to remove the outside screws.
2. Remove the clamp on the power cord by removing two Phillip head screws.
3. Noted there are 4 sets of wires for 8 wires total.
4. Two sets of wires can be removed with pliers and inserted into new switch.
5. The inlet power set of wires needed to be cut and installed into new switch. There are two set screws to screw in and secure power cords to switch.
6. The final 2 wires were cut and inserted into the new switch in the respective self locking connectors.
7. Re-install 2 power cord Phillip screws.
8. Install cover and install torx R10H screws.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal