Easy
Less than 15 minutes
This service switch is specially designed for use with Makita angle grinders. It is supplied directly from original equipment manufacturer. This part plays an important role because it controls on/off function of the tool. Because switches have internal mechanical parts, over time they will wear out requiring replacement switch. This switch has a plastic body and trigger/button. Please this item is sold individually.
Replacing this switch is an easy task that would only require a screwdriver.
• Remove housing screws
• Separate two pieces of a housing
• Disconnect wires from the switch
• Remove old switch and secure new one in place
• Reassemble and test the grinder
Switch 651195-8
OEM part for: Makita
Part Number: 651195-8
$29.95
In Stock
Order within the next 11 hours and your part ships today! 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.03 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Makita
GA5020 10.5A 5" SJS Angle Grinder View Diagrams & Manuals
GA6020 6" Angle Grinder View Diagrams & Manuals
GA6020YX1 Grinder View Diagrams & Manuals
This item works with the following types of products:
- Grinder Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Easy repair. My customer was very pleased.
Part arrived quickly and was well packaged. Fast turnaround for a very happy customer.
Eldon -
January 20, 2020
Verified Purchase
easy repair
The switch worked perfectly and arrived quickly
Reyes -
July 15, 2019
Verified Purchase
Correct part
Exactly the part I needed, and arrived in a timely manner.
Guest -
February 13, 2023
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Switch went out.
mick - May 31, 2023
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Power Drill
Parts Used
1.Took apart the housing.
2.Replaced the switch.
3.Replaced the housing, good to go.
2.Replaced the switch.
3.Replaced the housing, good to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grinder was not turning on when I pull the trigger
Jose - November 2, 2022
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Remove screws to remove a cap to have access to the trigger.
2. Carefully disconnect wires from the broken trigger.
3. Put new trigger in place and connect the wires back.
4. Before put the cap back on make sure the wires are the way they were before so they don't get smashed.
5. Put screws back on and go to go.
2. Carefully disconnect wires from the broken trigger.
3. Put new trigger in place and connect the wires back.
4. Before put the cap back on make sure the wires are the way they were before so they don't get smashed.
5. Put screws back on and go to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dead switch. No power to motor.
Eldon - January 20, 2020
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, cordless impact with #2 phillips bit.
Parts Used
Removed screws from handle. Split the 2 hafts apart. Removed wires one at a time from old switch and attached to new switch. Reassembled handle then I was finished.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Switch worked intermittently
ron - October 4, 2018
Tool Type
Grinder
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed handle, replaced switch and put handle back on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
