Switch Button 411478-6
Part Number: 411478-6
Order within the next 4 hours
and your part ships today!
and your part ships today!
Product Information
Specifications
|
Description:
This switch activator button is a genuine Makita replacement part, It is sold individually. It has to be pressed to activate the power switch. This is a very common replacement part. It is advised to order one or two extra to keep on hand. This Makita switch button is compatible with the tools listed below, and it is not guaranteed to fit any other power tool models. |
Frequently Purchased With
Compatibility
the 82 compatible machines
This part is compatible with the following machines:
Makita
LS1013 Miter Saw
LS1013 Miter Saw
LS1212 Miter Saw
LS1212 Miter Saw
2414B Chop Saw
2414B Chop Saw
BLS712 Miter Saw
BLS712 Miter Saw
BLS820 Miter Saw
BLS820 Miter Saw
LS0711Z Miter Saw
LS0711Z Miter Saw
LS1011N Compound Miter Saw
LS1011N Compound Miter Saw
LS1011 Compound Miter Saw
LS1011 Compound Miter Saw
LS1020 Miter Saw
LS1020 Miter Saw
LS1030N Miter Saw
LS1030N Miter Saw
LS1040 Miter Saw
LS1040 Miter Saw
LS1045 Miter Saw
LS1045 Miter Saw
LS1211 Miter Saw
LS1211 Miter Saw
2414NB Chop Saw
2414NB Chop Saw
LS1440 Miter Saw
LS1440 Miter Saw
LC1230 Chop Saw
LC1230 Chop Saw
LS800D Cordless Compound Miter Saw
LS800D Cordless Compound Miter Saw
2414DB Portable Cut Off Saw
2414DB Portable Cut Off Saw
LS711D Cordless Miter Saw
LS711D Cordless Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS0714 Four Pole Slide Compound Miter Saw
LS1013 Miter Saw
LS1212 Miter Saw
LS1212 Miter Saw
2414B Chop Saw
2414B Chop Saw
BLS712 Miter Saw
BLS712 Miter Saw
BLS820 Miter Saw
BLS820 Miter Saw
LS0711Z Miter Saw
LS0711Z Miter Saw
LS1011N Compound Miter Saw
LS1011N Compound Miter Saw
LS1011 Compound Miter Saw
LS1011 Compound Miter Saw
LS1020 Miter Saw
LS1020 Miter Saw
LS1030N Miter Saw
LS1030N Miter Saw
LS1040 Miter Saw
LS1040 Miter Saw
LS1045 Miter Saw
LS1045 Miter Saw
LS1211 Miter Saw
LS1211 Miter Saw
2414NB Chop Saw
2414NB Chop Saw
LS1440 Miter Saw
LS1440 Miter Saw
LC1230 Chop Saw
LC1230 Chop Saw
LS800D Cordless Compound Miter Saw
LS800D Cordless Compound Miter Saw
2414DB Portable Cut Off Saw
2414DB Portable Cut Off Saw
LS711D Cordless Miter Saw
LS711D Cordless Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS1214 Dual Slide Compound Miter Saw
LS0714 Four Pole Slide Compound Miter Saw
LS0714 Four Pole Slide Compound Miter Saw
LS0714 Four Pole Slide Compound Miter Saw
LS1013F Miter Saw
LS1013F Miter Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1040F Compound Miter Saw
LS1040F Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
LS1000 10 inch Miter Saw
LS1000 10 inch Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
2401B 10" Miter Saw
2401B 10" Miter Saw
LS1430 14" Miter Saw
LS1430 14" Miter Saw
LS1400 14" Miter Saw
LS1400 14" Miter Saw
BLS712SFK Saw
LS1013L (Type 1) Saw
LS1013 (Type 1) Saw
LS1013 (Type 2) Saw
LS1013 (Type 3) Saw
LS1013 (Type 4) Saw
LS1040 (Type 1) Saw
LS1040 (Type 2) Saw
LS1040 (Type 3) Saw
LS1040 (Type 4) Saw
LS1040 (Type 5) Saw
LS1214F Saw
LS1214L (Type 1) Saw
LS1214L (Type 2) Saw
LS1214LX1 (Type 1) Saw
LS1214LX1 (Type 2) Saw
LS1214 (Type 1) Saw
LS1214 (Type 2) Saw
LW1400X2 Grinder
LS0714 Four Pole Slide Compound Miter Saw
LS1013F Miter Saw
LS1013F Miter Saw
LS1013FL Compound Miter Saw
LS1013FL Compound Miter Saw
LS1040F Compound Miter Saw
LS1040F Compound Miter Saw
LS1013L Compound Miter Saw
LS1013L Compound Miter Saw
LS1000 10 inch Miter Saw
LS1000 10 inch Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214FL 12" Dual Slide Compound Miter Saw
LS1214L 12" Dual Slide Compound Miter Saw with Laser
LS1214L 12" Dual Slide Compound Miter Saw with Laser
2401B 10" Miter Saw
2401B 10" Miter Saw
LS1430 14" Miter Saw
LS1430 14" Miter Saw
LS1400 14" Miter Saw
LS1400 14" Miter Saw
BLS712SFK Saw
LS1013L (Type 1) Saw
LS1013 (Type 1) Saw
LS1013 (Type 2) Saw
LS1013 (Type 3) Saw
LS1013 (Type 4) Saw
LS1040 (Type 1) Saw
LS1040 (Type 2) Saw
LS1040 (Type 3) Saw
LS1040 (Type 4) Saw
LS1040 (Type 5) Saw
LS1214F Saw
LS1214L (Type 1) Saw
LS1214L (Type 2) Saw
LS1214LX1 (Type 1) Saw
LS1214LX1 (Type 2) Saw
LS1214 (Type 1) Saw
LS1214 (Type 2) Saw
LW1400X2 Grinder
Products Compatibility
This item works with the following types of products:
- • Chop Saw
- • Miter Saw
- • Pole Saw
- • Saw
- • Table Saw
Questions & Answers for Switch Button
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
18 of 18 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, None
Makita Miter Saw Trigger Button Missing - Saw Won't Start
Push the new trigger in the hole and you are fixed. Common problem with Makita - easy fix though - I try to keep a couple extra buttons around just in case.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
16 of 17 people found this instruction helpful
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools required.
The switch button popped out of miter saw handle
Easy completion.
1. Confirm there are no broken parts of the previous switch button left in the hole. (Nope.) (Confirm there are no broken parts of the dowel you were using in place of the switch button as well. Yep, there is. Crap. Needle nose, curse a bit. Extract small sliver of wood. Done.)
2. Take new switch button and insert into the hole.
2a. Turn switch button around and insert the small end into the hole. (Got it.)
3. Push until it clicks into place. (Click!)
4. Finally find the original switch button that you had been searching for over the past two weeks. (What the...????! Has it been there the whole time???)
5. Try to sell old switch button on eBay.
Seriously, the switch button is as easy of a repair as any I have ever seen. This thing pops in. I have had tougher times getting a coffee cup lid to seat properly.
1. Confirm there are no broken parts of the previous switch button left in the hole. (Nope.) (Confirm there are no broken parts of the dowel you were using in place of the switch button as well. Yep, there is. Crap. Needle nose, curse a bit. Extract small sliver of wood. Done.)
2. Take new switch button and insert into the hole.
2a. Turn switch button around and insert the small end into the hole. (Got it.)
3. Push until it clicks into place. (Click!)
4. Finally find the original switch button that you had been searching for over the past two weeks. (What the...????! Has it been there the whole time???)
5. Try to sell old switch button on eBay.
Seriously, the switch button is as easy of a repair as any I have ever seen. This thing pops in. I have had tougher times getting a coffee cup lid to seat properly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Miter Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes worn, missing parts
Remove the brush caps with a small screwdriver, then removed the old brushes, then I installed the new brush set. I then was able to just push the new switch button in the housing. I then was able to finally use pointer again by screwing it in. Thank you.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chop Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Saw wouldn't start
1. Pulled out the Switch Button and put in the new.
2. Unscrewed the plastic buttons that holds the Carbon Brushes (2 each) and installed the new brushes.
3. Tried running it...came on immediately.
2. Unscrewed the plastic buttons that holds the Carbon Brushes (2 each) and installed the new brushes.
3. Tried running it...came on immediately.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Safety switch lost.
Went to your site, found the part, bought it. It worked perfectly the first time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools were needed
Safety start button was broken and fell out of saw.
I pushed the new button into place and it snapped right in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Switch button missing
I pushed the new button in the hole in the handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Button was missing
Just pressed the new switch button into place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Lost safety button
Just pushed in the new replacement part
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Miter Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Saw switch would not operate
Replaced the safety button
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
22 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
20
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Easy repair
The part was the correct one for the saw, easy to install, and delivered within estimated delivery time.
Guest -
September 12, 2023
Verified Purchase
Worked great. Fast delivery too.
Just what I needed to fix my saw. Great service
Guest -
February 4, 2023
Verified Purchase
Super Awesome Safety Interlockda
It fit and works.
Paul -
December 6, 2022
Verified Purchase
Easy Repair worked as expected
Our saw trigger would work because this part was missing. It installed without taking anything apart.
Scott -
November 10, 2022
Verified Purchase
easy and fast
the right part easy and fast delivery
Guest -
September 3, 2022
Verified Purchase
Just what I needed, easy to find part, good price, fast delivery, thanks, i'll be back
New saw part fixed problem, hardly any down time.
Guest -
August 19, 2022
Verified Purchase
I now know where to go
When a tool part breaks or malfunctions, panic sets in. Where can I get the part--and what is it going to cost? eReplacement Parts was a terrific find. They had the part for my Mikita mitre saw, and it was reasonably priced without a ridiculous charge for shipping and handling. And it arrived within 5 days. Good old fashioned service when such a thing has gotten very rare.
Guest -
August 17, 2021
Verified Purchase
Perfect part, trivial repair
No problems with the part, or delivery, or installation of the part … “push it into the hole where the old one flew out of” is pretty straightforward
My only concern is with putting the second (spare) that I bought somewhere I might find it in one, two, three, … years if I end up needing it.
Guest -
July 19, 2021
Verified Purchase
Safety
Bought a $2.00 part and paid $6.00 for shipping. The part just became an $8 part. Happy with the part, but not shipping cost.
Guest -
December 4, 2020
Verified Purchase
Simple Fix
Part arrived as advertised. Great experience!
Guest -
August 18, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3