Product Information
Description:
A genuine replacement part that is specially manufactured for Jet drill presses. This box acts as the housing for the switch, protecting it from dust and other debris. It is made of durable black plastic material and it is sold individually, please note the hardware to secure it is sold separately. |
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Drill
- • Drill Press
Questions & Answers for Switch Box
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Drill Press
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Hex head.
I bought a used drill press and the on & off buttons where slightly melted and cover around them. Table crank boken, and needed proper key.
1. Unplugged drill press.
2. Removed on and off push buttons cover.
3. Unscrewed switch.
4. Removed switch wires.
5. Unscrewed and removed outer cover.
6. Installed new outer cover 3 screws.
7. Installed wires onto new on & off switch.
8. Put on & off switch cover over switch and aligned two screws.
9. Replaced table handle, plugged in and tested.
2. Removed on and off push buttons cover.
3. Unscrewed switch.
4. Removed switch wires.
5. Unscrewed and removed outer cover.
6. Installed new outer cover 3 screws.
7. Installed wires onto new on & off switch.
8. Put on & off switch cover over switch and aligned two screws.
9. Replaced table handle, plugged in and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
1 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Wrong dimensions, does not fit my drill press
Part arrived in good condition, but is not a fit for my drill press. To be specific, it is able to be affixed to the drill press, but this box is about 2 longer (downward) than the OEM switch box. When the quill on the drill returns upward after drilling an item, the quill catches against the bottom of this new switch box and makes a loud cracking noise. The part itself is in good condition, but its not a fit.
Luke -
March 15, 2023
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information