This replacement switch assembly is used with Oster Pro clippers. It is supplied directly from original equipment manufacturer. Switch plays a key role in the tool because it handles on/off operations. Because switches have internal mechanical part, over time they will wear out, eventually requiring replacement. It has a plastic body and it is sold individually.
To replace this switch you would need a screwdriver.
• Remove screws used to hold two pieces of housing together
• Disconnect wires from the old switch and remove it from the housing
• Place the new switch in the housing and connect wires to it
• Reassemble and test the clippers
Switch Assembly (2-speed) 58172005000
OEM part for: Oster Pro
Part Number: 58172005000
7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.02 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Oster Pro
This item works with the following types of products:
- Hair Clipper Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Switch Assembly (2-speed)
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Two speed on off switch was intermittent
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Needle nose pliers.
Parts Used
Someone with large fingers may have a problem putting wires back on since the screws are small and there isn't a lot of room. Suggest using needle nose pliers.
Clipper repair
Tool Type
Hair Clipper
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Off/On switch had broken after being dropped.
Tool Type
Hair Clipper
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Noted how the wires were connected the the switch
Remove the old switch
Installed the wires on the new switch and install the switch
Replaced back cover
Would not start
Tool Type
Hair Clipper
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
2. Removed the old switch.
3. Replaced the new switch, matching original connections.
4. Switched on new switch successfully.
Switch was defective. replaced switch and used new nut.
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Removed wires from switch
Removed broken switch
Installed new switch and secured with nut
Installed power cord to proper terminals on switch
Installed base back onto unit with the two long screws
Verified operation of clipper
Two speed switch broke.
Tool Type
Hair Clipper
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
2 speed switch broke. Clipper does not run. Lost Bale.
Tool Type
Hair Clipper
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Removed the top Clipper Switch cover.
Took pictures of where the wires were attached.
Unscrewed wires and contacts, then removed the old broken 2-speed switch.
Replaced new 2-speed switch, connected the switch wires and contacts by referring to the photos.
Confirmed that 2-speed switch was in neutral and pushed the switch to speed 1.
It worked.
Replaced the bale. Beyond easy.
Clipper would not run. Clipper repair guy said he thought it was switch, order one.
Tool Type
Hair Clipper
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
2 .R & R switch.
3. Assemble clipper switch housing.
cord and plug, start switch
Tool Type
Hair Clipper
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
2. Removed old parts.
3. Replaced with new parts.
4. Reassembled clipper assembly.
5. Tested to make sure put together properly.
6. Good to go.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.