Product Information
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Lathe
Questions & Answers for Support Bracket
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Lathe
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
Broken support bracket was keeping the head-stock from being able to sit flush on the bed.
1. Took off the C-nut and disassembled the head-stock tightening mechanism.
2. Removed the broken support bracket.
3. Put on the new support bracket.
4. Reassembled and replaced the C-nut.
5. Put the head-stock on the bed and everything sat flush and tight.
2. Removed the broken support bracket.
3. Put on the new support bracket.
4. Reassembled and replaced the C-nut.
5. Put the head-stock on the bed and everything sat flush and tight.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information