Product Information
Description:
This is a genuine Hoover carpet steamer belt. This is a style 29 belt, compatible with the Dual Power carpet steamer model # FH509000. It is not unusual for the new belt to be smaller (less stretched out) than the old belt. To change this belt, only a screwdriver is needed. One belt is included per package. How to Remove or Replace this Belt • Flip carpet washer onto its side • Use a Phillips screwdriver to remove seven screws holding belt cover in place • Remove belt cover from unit; wheel is intended to be removed with belt cover • Pull both brushrolls outwards to remove them from steamer • Remove old belt • Slip brushrolls through new belt; place new belt on area of brushrolls without bristles • Pull and slide brushrolls onto steamer, making sure that brushroll end caps are positioned properly • Place new belt onto motor shaft • Replace belt cover and replace screws |
No Longer Available:
Unfortunately, this part isn't available any more at eReplacementParts. This could be because:
- The manufacturer doesn't make this part any more
- There are no substitute parts made by the manufacturer to replace this part
- There is no longer any way for us to find this part and stock it in our warehouse
We would love to help you find the part you need, but our call center agents will, regrettably, be unable to assist you with tracking it down. However, you may still be able to locate the part you need by trying the following:
- Using a search engine to type your part number and see if other retailers still have this part in stock
- Visiting online stores such as eBay and finding sellers that have this part
- Trying retailers and repair stores in your local area to see if they have the part in their inventory
- Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part
- Reaching out to the manufacturer of your product to see what their recommendations are for replacing this part