Easy
15-30 minutes
This steel plate is an authentic Makita replacement part. It is made specifically for the Makita 9924DB Belt Sander. This plate simply provides a durable surface for the sandpaper to push against during sanding. It should be replaced if it is worn or damaged. The installation for this part is straightforward and should only take a few minutes. A screwdriver is needed to remove and re-install the two screws holding the plate in place.
Steel Plate 341705-6
OEM part for: Makita
Part Number: 341705-6
$6.10
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Sander Parts
This part replaces obsolete part #: 423036-6
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Love affair continues
My belt sander of 30+ years is whole again! It is wonderful to be able to get parts!!!
Guest -
February 15, 2021
Verified Purchase
Easy repair. Worked as expected and back in business.
The part was the correct part and was sent as stated as mentioned. Back to the woodshop with belt sander working again.
Guest -
December 4, 2020
Verified Purchase
Great Part! And speedy delivery!
Replacement parts are nearly impossible to come by in Hong Kong! Thank's to you I have been able to order the broken part and I am back to happily use my Makita Belt Sander!
iGlobal -
November 19, 2019
Verified Purchase
Great purchase.
The parts where great and they came on time.
Guest -
November 11, 2019
Verified Purchase
sastisfied
just like your company for getting my tool parts ,you have a vast inventory
Kim -
July 24, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Steel Plate
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Steel plate and cork was worn out
brett - March 11, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Two screws remove old plate. Install new plate and cork pad. Install 2 screws.
Super easy. The belt sander needed some love. She has her new parts and is running like new. Brett
Super easy. The belt sander needed some love. She has her new parts and is running like new. Brett
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Armature bearing worn out. Steel plate and cork pad worn out
Jim - August 7, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers
Remove the screws until dismantled. Remove the bearing plate and the pad. Reinstall in reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
switch was not working
Joseph - December 25, 2020
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
removed old switch,installed new one
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Steel back up plate wore out
Galen - December 5, 2020
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Very easily to replace parts.
Unplug the belt sander.
Turn the belt sander upside down. Take off the abrasive belt. Use a Phillips screwdriver to remove the two front screws and remove the metal backup and cork plate.
Install the cork and then metal plate aligning the holes and replace the screws.
Snuggly tighten the two screws.
Replace abrasive belt. Ready to sand.
Unplug the belt sander.
Turn the belt sander upside down. Take off the abrasive belt. Use a Phillips screwdriver to remove the two front screws and remove the metal backup and cork plate.
Install the cork and then metal plate aligning the holes and replace the screws.
Snuggly tighten the two screws.
Replace abrasive belt. Ready to sand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken plate
YANA - June 18, 2020
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove screws and replace plate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Roller was bent.
Michael - February 13, 2019
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Changed out all the parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bought the tool used and parts were missing so decided to refurbish the sander
Kevan - November 6, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Removed what was left of the old cork pad, installed new cork pad then the metal plate tightened two screws. Installed new dust bag and it all worked great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cork and steel pads were worn out
Andrew - August 22, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Replaced pads by removing 2 philips that hold pads in place. Very easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Uneven sanding marks due to heat warped sanding plate
Peter - April 13, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed belt. Unscrewed the 2 screws that hold the bottom plate and cork plate to the base. Removed old parts and installed the new cork and steel plates. Tightened the 2 mounting screws. Reinstalled the belt and tracked it to true. 3 minutes time, and I now have a smooth and flat sanding job again!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sander is old and replaced parts were well worn.
Andrew - January 28, 2018
Tool Type
Sander
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers
Removed sanding belt
Removed base plate cork plate and steel plate (4 machine screws)
Removed "E" clip on front "tension" roller and removed roller (save 2 bearing shield cups)
Removed drive belt cover
Removed drive belt
Removed drive gear cover (2 machine screws)
Removed "E" clip and washers on drive roller and removed roller (save the bearing shield cup)
Install saved bearing shields on new Drive roller(1) and Tension roller(2)
Reinstall replacement parts in reverse order of disassembly
Removed base plate cork plate and steel plate (4 machine screws)
Removed "E" clip on front "tension" roller and removed roller (save 2 bearing shield cups)
Removed drive belt cover
Removed drive belt
Removed drive gear cover (2 machine screws)
Removed "E" clip and washers on drive roller and removed roller (save the bearing shield cup)
Install saved bearing shields on new Drive roller(1) and Tension roller(2)
Reinstall replacement parts in reverse order of disassembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
