Steam Ring SP0000136
Part Number: SP0000136
Order within the next 2 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: SP0014938, 800ESXL192, BES830XL/148, BES820XL/148, BES250XL/182, ESP6SXL/154 and 800ESXL/192.
Product Information
Description:
| This is a genuine Breville replacement part, it is sold individually. The purpose of the 800ESXL/192 Steam Ring is to create a seal to prevent steam or hot water from leaking from between the Filter Holder Assembly and the Thermal Block Assembly. This part has a tendency to lose its ability to seal over time. It may be a good idea to order an extra one, to keep it on hand. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 10 compatible machines
Products Compatibility
This item works with the following types of products:
- • Espresso
Questions & Answers for Steam Ring
Is this part compatible with BS 800esxl ? Its not clear from the info in your product description.Its an older machine. Thanks!
Nick
for model number bs 800esxl
asked on 2024-01-04
Hi Nick,
Thank you for your question. This steam ring does work for an 800ESXL. We hope this helps!
eReplacementParts Team January 04, 2024
Hi, can you tell me what the inner and outer size is?I need this ring for a Solis espresso machine but I think its the same machine. Thanks, Chris
Chris
for model number Steam Ring Part Number:SP0000136
asked on 2022-08-16
Hi Chris,
Thank you for your question. The outer diameter measures approximately 2-3/8 inches and the inner diameter measures approximately 1-3/4 inches. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team August 16, 2022
Repair Instructions: Submitted by Customers Like You
26 of 27 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Unscrew the metal strainer - remove old gasket, replace and screw back on.
This is an easy fix. There is a perforated metal disk where the water comes out of the espresso machine. Unscrew the screw in the middle, and evaluate the gasket. Mine was ripped on one edge which caused the water to spray out sideways because there was not a good seal between the machine and the coffee holder. I replaced the seal, and screwed the metal disk back in. That was it.
Also, Amazon was selling the part for $20 - nice to buy from this site for $1.99 for two seals.
Also, Amazon was selling the part for $20 - nice to buy from this site for $1.99 for two seals.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
10 of 10 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, #2 Philip screwdriver short
Breville Expresso ESP6SXL machine is leaking water out of the handle.
After removing the screw holding the steam water connector (133), I slipped in the new ring, re-install it and the machine is working like new. I bough 2 extra steam rings for spare since the price is so cheap ( $1.70 ea.) It cost more for the shipping cost than the price of all three. This is the only item that will go bad with time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Coffee stopped
Removed the ring - cleaned the space. Very easy! Threw out another perfectly good machine (as it turns out) a few years ago because I did not know how to fix this problem.
Fixed it this time! Good for the environment to keep these good machines going!
Fixed it this time! Good for the environment to keep these good machines going!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Espresso
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Leaking under pressure
Removed 4 screws holding cracked Fixing Seat and 1 screw holding Steam Ring adapter. Installed new items and reinstalled screws. The only hold up was trying to figure out which direction to install the Stem Ring, because the old one was so badly damaged it came out in pieces, but after a little trial and error it became evident.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Coffee weak
1. Removed steel plate
2. Removed worn gasket
3. Replaced w a new gasket
4. Replaced steel plate
Good as new!
2. Removed worn gasket
3. Replaced w a new gasket
4. Replaced steel plate
Good as new!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Fingers
Coffee grounds and liquid major leak at locking mechanism
Remove center screw with short phillips screwdriver.
Remove metal steam ring, clean all debris, with fingers only, work replacement rubber ring on metal plate, replace screw, done! 30 repair that major time spent cleaning area in steam ring area.
Remove metal steam ring, clean all debris, with fingers only, work replacement rubber ring on metal plate, replace screw, done! 30 repair that major time spent cleaning area in steam ring area.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Small pick to dig out broken steam ring
Steam ring didn't keep a seal anymore
Removed upper basket
Dug out old steam ring
Installed new steam ring
Replaced upper basket
Dug out old steam ring
Installed new steam ring
Replaced upper basket
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Steam ring split
Undo screw in center, remove steam plate with holes and steam ring behind. Clean area. Insert ring and put plate on top and put screw back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Espresso
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Part broken
Removed and replace with the new parts no instructions needed simply replace the parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Espresso
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Seal fatigue from enthusiastic use.
Flipped machine over, removed the only screw and old gasket. First attempt was upside down, so total time reflects initial error.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Small Part Paradise
I replaced the 20 year old drain cover for my shower base and the 15 year old steam ring for my cappuccino maker, sorry landfill, thanks eReplacement Parts
iGlobal -
January 19, 2023
Verified Purchase
An easy fix
Part arrived quickly. The fix was easy and as a result of changing this ring I discovered that my machine was all gunked up. It’s been better since I cleaned it.
Guest -
September 9, 2019
Verified Purchase
Easy to find, easy to install. Saved my 15 year old machine.
Easy to find, easy to install. Saved my 15 year old machine.
Guest -
September 3, 2019
Verified Purchase
Our Breville espresso machine started to leak - found the PART - and voila!! (That picture looks like a condom but it ain't!) You must have one of these handy, lord knows when it starts to spout!.
Me, I bought a three-pack....
Guest -
August 23, 2019
Verified Purchase
Thank you!
Thank you!
Guest -
June 27, 2019
Verified Purchase
fast, good decription and easy to use website
no problem with part, prompt
joel -
April 22, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
