Starter Rope 505305125

Description:

This is a genuine manufacturer approved replacement part designed for use with Husqvarna chainsaws. The purpose of this rope is to allow user to to start the engine. Includes one (1) fabric rope per order. Please note the grip/handle is sold separately.

Frequently Purchased With

Recoil Spring..
$18.68

Pulley
$32.36

Spring Cassett..
$24.90

Fuel Filter
$11.20

Starter Handle..
$12.44

Spark Plug
$5.29

Return Spring..
$27.40

Compatibility

This part is compatible with the following machines:

Husqvarna

570 (2005-04) Chainsaw
570 (2007-01) Chainsaw
570 (2007-01) Chainsaw
570 (2008-08) Chainsaw
570 (2008-08) Chainsaw
570 EPA (2004-09) Chainsaw
570 EPA (2004-09) Chainsaw
570 EPA (2005-04) Chainsaw
570 EPA (2005-04) Chainsaw
570 EPA (2008-08) Chainsaw
570 EPA (2008-08) Chainsaw
570 XP (2007-01) Chainsaw
570 XP (2007-01) Chainsaw
575 XP (2005-04) Chainsaw
575 XP (2005-04) Chainsaw
575 XP (2007-01) Chainsaw
575 XP (2007-01) Chainsaw
575 XP EPA (2004-09) Chainsaw
575 XP EPA (2004-09) Chainsaw
575 XP EPA (2007-01) Chainsaw
575 XP EPA (2007-01) Chainsaw
575 XP EPA (2005-04) Chainsaw
575 XP EPA (2005-04) Chainsaw
576 XP (2008-08) Chainsaw
576 XP (2008-08) Chainsaw
576 XP EPA (2008-08) Chainsaw
576 XP EPA (2008-08) Chainsaw
445 E (2007-09) Chainsaw
445 E (2007-09) Chainsaw
45 (1987-01) Chainsaw
45 (1987-01) Chainsaw
45 (1988-02) Chainsaw
45 (1988-02) Chainsaw
45 (1988-05) Chainsaw
45 (1988-05) Chainsaw
45 (1989-06) Chainsaw
45 (1989-06) Chainsaw
45 (1990-06) Chainsaw
45 (1990-06) Chainsaw
45 (1991-06) Chainsaw
45 (1991-06) Chainsaw
45 (1995-06) Chainsaw
45 (1995-06) Chainsaw
450 E (2007-03) Chainsaw
450 E (2007-03) Chainsaw
450 E (2007-09) Chainsaw
450 E (2007-09) Chainsaw
455 E (2007-01) Chainsaw
455 E (2007-01) Chainsaw
455 E (2006-06) Chainsaw
455 E (2006-06) Chainsaw
455 (2004-10) Chainsaw
455 (2004-10) Chainsaw
455 (2005-01) Chainsaw
455 (2005-01) Chainsaw
455 (2005-03) Chainsaw
455 (2005-03) Chainsaw
455 Rancher (2006-02) Chainsaw
455 Rancher (2006-02) Chainsaw
455 (2006-06) Chainsaw
455 (2006-06) Chainsaw
455 (2007-01) Chainsaw
455 (2007-01) Chainsaw
460 (2005-03) Chainsaw
460 (2005-03) Chainsaw
460 (2006-02) Chainsaw
460 (2006-02) Chainsaw
460 (2006-06) Chainsaw
460 (2006-06) Chainsaw
460 (2007-01) Chainsaw
460 (2007-01) Chainsaw
49 (1996-01) Chainsaw
49 (1996-01) Chainsaw
50 (1985-02) Chainsaw
50 (1985-02) Chainsaw

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Chain Saw
• Saw

Repair Instructions: Submitted by Customers Like You

2 of 2 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Recoil Spring - 501763101

Starter Rope - 505305125

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Nutdriver

Broken recoil spring and rope

Set spring in place/installed rope in pulley/installed into spring and fastened. Wound pulley one rotation short of tight/fed rope threw housing into rubber handle and tied it off. Allowed pulley to unwind. Installed housing back onto saw

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Chain Saw

Parts Used:

Recoil Spring - 501763101

Starter Rope - 505305125

Starter Pulley - 505303735

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Nutdriver

Starter rope was hard to pull and when it did come out it wouldn't retract.

Removed top cover. Then remove the worn parts. Removed the rope from the hand grip .Put the new pulley in place then the spring, put the rope in the pulley. Then wound the pulley and spring until I thought It was tight enough. Put the rope thru the housing and attached it to the hand grip. Tightened down cover and let the rope go slowly in

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Starter Rope - 505305125

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Chain saw starter rope broke

Removed pull start cover panel. (4) screws
Unwound old rope, keeping in mind the direction it came off.
Tied a knot in the end and heated it using a lighter.
Pushed open end though hole in starter spring holder until knot on other end seated.
Wound cord the direction I removed earlier.
Ran open end through guide hole on cover and also throb handle.
Pulled cord until it was toute and tied a knot on handle side.
Melted end with a lighter.
Replace pull starter cover (4) screws

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Rope - 505305125

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, Allen wrench

Starter rope replacement, the original broke.

As explained

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Starter Rope - 505305125

Wear Protection - 544253101

Oil Hose - 544084202

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

chain saw starter rope broke & chain oiler hose cracked

r/r rope & oiler hose

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Starter Pulley - 537201901

Starter Rope - 505305125

Air Filter - 503413201

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver

Starter puller was simply worn out and when I removed it of course the starter spring unwound. Starter rope worn but not broken

Rewound spring in my hand rather than on saw. Installed spring and cover. Rope on pulley then reverse wound pulley to allow it to wind rope.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Recoil Spring - 501763101

Starter Rope - 505305125

Starter Pulley - 505303735

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Allen wrench

Removed four screws securing the case.
Removed Allen head screw to remove rope pull assembly.
Replaced the parts and wrapped the new rope around the pulley.
Threaded the rope through the eyelet on the case and wound the spring a couple more turns before inserting the rope through the handle and tying a knot. Replaced the case and four screws.
Works perfect.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Chain Saw

Parts Used:

Starter Rope - 505305125

Pinion - 503892202

Starter Pulley - 503876301

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver

Chainsaw starter pully broke, rope worn

Removed cover and screw retaining the pulley, replaced pulley and rope and cleaned thoroughly.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

4

4 stars

0

3 stars

0

2 stars

1

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Starter rope fit properly and worked great

Part arrived on time as promised and my chain saw is back in service!

Guest - June 8, 2021 Verified Purchase

Great part

Worked great

Guest - February 23, 2021 Verified Purchase

Easy and fast

Correct Part arrived quickly and was easy to install. Will use your business for all my chainsaws replacement parts. Job well done thank you

Guest - April 18, 2020 Verified Purchase

Great part

Fast service! Great return policy

Guest - September 3, 2019 Verified Purchase

received wrong part

put saw back together and starter would not function properly. After a bit of detective work, found one of the parts completely wrong

Donald - August 20, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Starter Rope