Starter Pulley 521316001

Description:

This manufacturer approved replacement starter pulley is designed for use with gas blowers/vacuums. This recoil pulley is susceptible to a normal wear due to constant wear and will eventually require replacement. It is made out of plastic and it is sold individually. Please note, housing, rope and starter grip are all sold separately.

To complete this repair you will need a screwdriver and an allen wrench/hex key.

Frequently Purchased With

Spring And Con..
$4.99

Compatibility

This part is compatible with the following machines:

Expand the 21 compatible machines

Products Compatibility

This item works with the following types of products:

• Blower
• Vacuum

Repair Instructions: Submitted by Customers Like You

7 of 8 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Star Bit to remove cover.

Blower pull string would not catch to start the motor

Removed the old pulley wheel and replaced it. BE careful not to let the spring pop out. This is a pain to get the spring back in.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

2 of 2 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Screwdriver with Torx-bits

Plastic Starter puller was stripped, didn't engage when rope was pulled.

1. Removed all the plastic covers.
2. Removed the starter pulley cover, the spring escaped!
3. Fitted the new starter pulley and rewound the spring.
4. Remember to fit the three screws and shaped washers to hold the starter puller in place!
5. Refit all the plastic covers. Test!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Pliers, Power Drill, Socket set, Wrench Set, Nutdriver, Torx set and drivers

The top of the teeth broke off

Dis assembled blower found the bad part watched the video on the pulley replacement. Re assembled blower with new pulley. Filled with gas tested as a good repair.
Thanks.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

1 of 1 people found this instruction helpful

Tool Type:

Blower

Parts Used:

Spring And Container - 638033001

Screw (10-14 X 3/4 In.) - 660629002

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

1-2 hours

Tools Used:

Screwdriver, Pliers, Socket set

Starter pulley broken

Took the blower apart, removed the old starter pulley, replaced with the new starter pulley and put the blower back together. I also replaced the spring and the screws.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set, Nutdriver, torx bit

bad starter pulley

Removed and replaced the starter pulley.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Nutdriver

Leaf blower starter pulley edges broke and wouldn't engage with starter dogs.

Went on internet stated my problem and product name and part number and was directed to replacement parts video and a technician named Mark. The video and easy to follow and repaired my leaf blower.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Pliers, Socket set

Starter pulley (plastic) wore out edges, 2nd time.

Removed old pulley and replaced with new $3.99 part. Easy as long as you don't lose the spring tension.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set

Starter pulley was stripped out

Googled a how to video

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver, Pliers

Would not start

Remove old rope

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Starter Pulley - 521316001

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wrench Set, None

No problems, the repair went smoothly. I purchased a replacement lower assembly with starter/ rope

Attached the motor to the new lower assembly and then finished assembling the blower. Started first pull and ran smoothly. Did adjust the valves to 4 thousandth.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

5 Reviews

Click to filter by ratings:

5 stars

5

4 stars

0

3 stars

0

2 stars

0

1 stars

0

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Great part's.

Fixed it. Working great

Guest - August 22, 2022 Verified Purchase

Finally Repaired

I man that I repair outdoor equipment for brought me a Ryobi 4 cycle blower that one of his customers give him because the recoil was messed up and would not engage. He gave me the blower because he knew that I could find someway to repair it and then sell it. I found out that the recoil pulley was stripped. I looked at all of the online repair parts supply websites and found one, that they showed was in stock. I ordered the part. A week later they sent me an email telling me that the part was no longer available, so I looked some more online and could not find any. After waiting for about six months and tried again and found this one on eReplacement Parts.Com. I ordered it and was waiting for the email to tell me that the part was no longer available. However I was pleased to get the email that said my part had been shipped. eRepalcement parts came through for me again. I have bought parts from them many times and they have always provided the parts I needed at a good price and with fast shipping.

Tim - December 21, 2021 Verified Purchase

trimmer parts

The knowledge service and part availability is awesome +++++

Guest - September 7, 2020 Verified Purchase

Ryobi starter pulley

Part fits perfectly at a very reasonable price. Will buy from your site again. Thank you

Guest - August 27, 2020 Verified Purchase

Better then original part

This part was for my ryobi hand blower and it worked out great love it will buy from this company again.

Guest - September 23, 2019 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

1

NEXT >

Questions & Answers for Starter Pulley